Troubleshooting. Konftel 250

22

TRoUblesHooTinG

If your Konftel 250 is not working properly:

• Check that the microphone is turned on during the call. The blue microphone LEDs must be lit.

• If the display shows “ANALOG OVERCURRENT”, the Konftel 250 is connected to a digital telephone jack. Switch to an analogue phone jack.

• Bypass any extension cables and check that the Konftel 250 is working properly.

• If the Konftel 250 needs to wait for a second dialling tone, you should enter a pause using the pause/mute button when entering a telephone number as an instruction or in the phonebook.

You can find more FAQ on the Konftel website, www.konftel.com/250.