advertisement
▼
Scroll to page 2
of
34
3. Contents of the Weather Station Kit
Before installing your weather station, please check that the following are complete:
Hardware
Components
Fittings
Main Console Unit (optional) AC/DC
7.5V output adaptor
Thermo-Hygro
Sensor
Rain Sensor:
- Funnel shaped
Lid with Battery
Hatch
- Sensor Base
- Bucket See-saw
Mechanism
- Protective Screen
4 screws for securing unit to ground
Anemometer (Wind
Sensor):
- Wind Cups
- Wind Vane
- Anemometer arm
- Anemometer base
4 screws for securing unit to vertical surface
6
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 3 1. Introduction
- 4 2. Features
- 6 3. Contents of the Weather Station Kit
- 7 4. Installing your weather station
- 7 Setting up the Remote Weather Sensors
- 7 Setting up the Thermo-Hygro Sensor(s)
- 7 Setting up the Rain Sensor
- 8 Setting up the Anemometer (wind sensor)
- 8 Setting up the Main Console Unit
- 9 Starting up the Main Console Unit
- 9 5. Using your Weather Station
- 9 Buttons and Controls
- 11 Navigating between Different Modes
- 13 6. Customizing your Weather Station
- 14 7. Using the Different Weather Modes
- 14 Pressure and Weather Forecast Mode
- 17 Clock and Alarm Mode
- 20 Sunrise/Sunset Mode
- 21 Temperature and Humidity Mode
- 24 Rain Mode
- 25 Wind Mode
- 27 8. Maintenance
- 28 9. Troubleshooting
- 29 10. Technical Specifications
- 31 11. Precautions
- 32 12. Appendix