Windows Driver. Datamax Mark III E-4206L, E-4206L, Mark III E-4305L, Mark III E-4206P, E-4305A, E-Class Mark III Professional+, E-4206P, E-Class Mark III, Mark III E-4305P

3 .

.

.

6 W i i i n d o w s D r r i i i v e r r

The Windows driver is located on the Accessories CD-ROM included with your printer. For the latest version please visit our web site at http://www.datamax-oneil.com

Installing the Windows Driver:

1) Place the Accessories CD-ROM included with your printer into your computers CD-ROM drive.

2) Once the CD-ROM starts select your printer model then

“Install Driver” from the menu and follow the instructions on the screen to install.

3) When prompted, select your printer from the list, (i.e.

Datamax-O’Neil E-4xxx Mark III). Continue to follow the on-screen instructions to install the driver.

Chapter 3 – Printer Operation 27

Important Notes:

The Windows driver functions the same as any other Windows printer. While built-in help files provide information on all settings, there are some important setting parameters that should be observed for trouble free printing:

Page Setup Tab: Stock

It is important that the Stock setting matches the size of the label you are using. If you cannot find a match for your label click New and enter the dimensions of your label.

Options Tab: Print Speed & Printhead Temperature

These two settings will have the greatest effect on print quality. Some label stocks will require more heat and slower print speeds to generate a quality image.

The Windows application software used to create the label format will likely have a "Page Setup" screen. This will also need to match the size of the label you are using.

28 Chapter 3 – Printer Operation