Using the transmitter. Spektrum SPM7800C, DX7s 7-Ch, DX7s 7-Ch DSMX Radio System, SPM55101, DX7s Transmitter Only MD2, SPMR7800

Add to My manuals
32 Pages

advertisement

Using the transmitter. Spektrum SPM7800C, DX7s 7-Ch, DX7s 7-Ch DSMX Radio System, SPM55101, DX7s Transmitter Only MD2, SPMR7800 | Manualzz

EN

USING THE TRANSMITTER

Antenna

The transmitter antenna bends and turns at the hinge (A) and only bends and turns to the front of the transmitter. The antenna cannot point to the back of the transmitter. Turn the antenna tip to point away from the model and ground. Signals transmit strongest from the antenna shaft, not the tip.

WARNING: Do not pick up the transmitter by the antenna.

Do not alter or put weight on the antenna. Damage to antenna parts can decrease transmitter signal strength, which can result in loss of model control, injury or property damage.

NOTICE: While DSMX allows you to use more than 40 transmitters simultaneously, when using DSM2 receivers, DSMX receivers in DSM2 mode or transmitters in DSM2 mode, do not use more than 40 transmitters simultaneously.

SD Card

Use an SD Card and the Transfer SD Card screen in the

System Setup list to to do the following:

• Import (copy) models from another DX7s transmitter

• Export (transfer) models to another DX7s transmitter

• Update AirWare™ software in the transmitter

• Share model files among DX7s transmitters.

Put an SD card in the SD card slot on the left side of the transmitter with the card’s label facing forward.

K

Main Screen

A Transmitter Battery Charge Level

Function

B Model Memory

I

C Model Name

D Model Type

E

Elevator Trim (Mode 2)

Throttle Trim (Mode 1)

F Aileron Trim

G

Digital Battery Voltage

(an alarm sounds and the screen flashes when battery charge gets down to 4.3V when using an NiMH battery or 6.4V for a LiPo battery.)

H Rudder Trim

J

Timer

Throttle Trim (Mode 2)

Elevator Trim (Mode 1)

J

I

I

A

B

H

C

A

G

F

E

D

G

E

8 SPEKTRUM DX7s • RADIO INSTRUCTION MANUAL

advertisement

Related manuals