advertisement
▼
Scroll to page 2
of
63
Section 2: Diving with the Monitor 3 Air
Functions During the Dive
Current Depth
Current depth is displayed in one-foot increments down to a maximum of 330 feet. When the depth is two feet or less, the depth display is replaced with three dashes.
Note: Depth measurement is based on freshwater. When diving is salt water, the depth displayed will be slightly greater than the actual depth, depending on the salinity of the water.
Current depth display at 100 feet
16
Current depth display at 2 feet or shallower
advertisement
Related manuals
advertisement
Table of contents
- 9 What is a “Dive Computer
- 9 Definition of Compartments
- 9 Multi-Level Diving
- 10 Diving Responsibly
- 11 Features of the Monitor 3 Air
- 11 The Computer Screen
- 11 The Electrical Contacts
- 13 The Transmitter
- 15 Attaching the Transmitter to Your Regulator
- 16 Pairing the Wrist Unit to the Transmitter
- 19 Using the Monitor 3 Air Without the Transmitter
- 19 Checking the Battery Power
- 21 Preparation for the Dive
- 23 Functions During the Dive
- 23 Current Depth
- 24 Dive time
- 24 Maximum depth
- 25 Ascent Rate
- 26 No-Stop Time
- 27 Cylinder Pressure
- 27 Antenna Symbol
- 28 Graphic Air Time Remaining
- 28 Digital Air Time Remaining
- 29 High Air Consumption Warning
- 30 Decompression Stop Information
- 31 Total Ascent Time
- 31 SOS Mode
- 32 Functions at the Surface
- 32 Upon surfacing
- 32 Surface Mode
- 32 Surface mode icon
- 33 Wait-to-fly Time
- 34 Desaturation Time
- 34 Surface Interval Time
- 35 Microbubble Warning