Functions at the Surface. A&D 2 Plus

Functions at the Surface

Section 2: Diving with the Monitor 3 Air

Surface Mode

Note: Surface mode will stay visible for 3 minutes. After that, the screen will go blank to save battery power. To reactivate the surface mode display, touch contacts A and D.

Upon surfacing

After reaching the surface, the Monitor 3 automatically switches into wait-mode for five minutes. This is the amount of time necessary to recognize the end of the dive. The five minute delay allows you to come to the surface to orient yourself, then resume the dive. If you stay at the surface longer than 5 minutes, the dive is entered into the logbook and the Monitor 3 Air switches into surface mode.

Display immediately upon surfacing

Surface mode icon

Five minutes after surfacing, the Monitor 3 enters Surface

Mode. While in Surface Mode, the Surface Mode Icon appears at the bottom of the icon window.

Surface mode icon display

25