13. SETTING THE ALARM. Audible Numeric Pager

13. Setting the Alarm

SET ALARM ?

13

Fig. 13b

05

:00P

06:

00

P

The pager has a daily alarm for you to set at a specific time to alert you of any important task. At the standby screen, press the FUNCTION button and hold for more than 2 seconds to enter into the function menu mode.

Press the FUNCTION button to scroll through the menu prompt until “SET ALARM? ” prompt is displayed

(Fig. 13a).

Press the READ button to enter into alarm setting mode.

Pager will display the “ALARM ON ” prompt (Fig. 13b).

Press the FUNCTION button to set the alarm. This will cause the hour field to blink.

Press the READ button to increment the hour field

(Fig. 13c).

Press the FUNCTION button to move to the minute field and set the minute field by pressing the READ

Fig. 13c button (Fig. 13d).

Fig. 13d

19 Setting the Alarm

ALARM ON

Fig. 13e

Continue to set the AM/PM field in a similar way. Upon completion, pager returns to standby screen displaying the desired set time. Alarm icon will light up to indicate alarm is active.

To Turn Off Alarm

While in standby mode, press the FUNCTION button and hold for more than 2 seconds to enter into the function menu mode. Press the

FUNCTION button to scroll through the menu prompt until “SET ALARM? ” prompt is displayed.

Pressing the READ button will cause the pager to display “ALARM ON ” (Fig. 13e).

Press the READ button again to turn off the alarm. Pager will display as Fig. 13f.

ALARM OFF

Fig. 13f

20 Setting the Alarm