advertisement
![Using S-Video jack. Philips mrd120, MRD120 - Av Systems | Manualzz Using S-Video jack. Philips mrd120, MRD120 - Av Systems | Manualzz](http://s1.manualzz.com/store/data/003381707_1-cd103ee2f78f534d2c1542767fc65f71-360x466.png)
Connections
Option 3
OOFER
Option 4
ANT IN
Antenna or
Cable TV signal
RF coaxial cable to TV
2
INT IN
Back of RF Modulator
(example only)
TO TV VIDEO
IN
AUDIO IN
R L
CH3 CH4
3
1
REAR
LEFT
SUBWOOFER
2 1 3 4
IMPORTANT!
If S-Video is used for DVD playback, the system’s VIDEO OUT setting will need to be changed accordingly.
Details are on page 23.
Using S-Video jack
1
Use an S-video cable (not supplied) to connect the DVD system’s S-VIDEO
OUT jack to the S-Video input jack
(or labelled as Y / C or S-VHS) on the TV.
2
To hear the TV channels through this
DVD system, use the supplied audio cables (white / red) to connect AUDIO
IN-TV) jacks to the corresponding
AUDIO OUT jacks on the TV.
3
Set the P-SCAN switch to ‘OFF’.
IMPORTANT!
If your TV only has a single Antenna In jack (labelled as 75 ohm or RF In), you will need an RF modulator in order to view DVD playback on the
TV. See your electronics retailer or contact Magnavox for details on RF modulator availability and operations.
Using an accessory RF modulator
1
Use the supplied composite video cable
(yellow) to connect the DVD system’s
VIDEO OUT jack to the video input jack on the RF modulator.
2
Use an RF coaxial cable (not supplied) to connect ANTENNA OUT or TO TV jack on the RF modulator to the ANTENNA
IN jack on the TV.
3
Connect the Antenna or Cable TV service signal to the ANTENNA IN or
RF IN jack on the RF modulator. (It may have been connected to your TV previously. Disconnect it from the TV).
4
Set the P-SCAN switch to ‘OFF’.
9
advertisement
Related manuals
advertisement
Table of contents
- 5 Supplied accessories
- 5 Care and safety information
- 8 Step 3: Connecting TV
- 8 Using Composite Video jack
- 8 (Pr / Cr Pb / Cb Y)
- 9 Using S-Video jack
- 9 Using an accessory RF modulator
- 10 Step 4: Connecting FM / MW antennas
- 10 Step 5: Connecting the power cord
- 11 Connecting a VCR or Cable / Satellite Box
- 11 Viewing and listening to the playback
- 11 playback
- 11 Connecting digital audio equipment
- 11 Digital Recording
- 12 Main unit and remote control
- 13 remote only
- 14 remote control
- 14 the system
- 14 Step 2: Setting the TV
- 15 corresponds to your TV
- 15 Setting the TV shape
- 16 Step 3: Setting the speakers
- 16 Adjusting the delay time
- 16 Adjusting the speaker output levels
- 17 Step 4: Setting language preferences
- 17 On-screen display (OSD) language
- 18 Playable discs
- 18 Playing discs
- 19 Using the Disc Menu
- 19 Basic playback controls
- 19 stopped point (DVD / VCD / CD)
- 20 Selecting various repeat functions
- 20 Repeat play mode
- 20 chapter / track
- 20 (audio CDs and VCDs)
- 20 Clearing the programme
- 21 Using the menu bar to programme
- 21 Playing MP3 / Picture disc (Kodak, JPEG)
- 22 Using the menu bar
- 23 Using the Setup Menu
- 23 Setting the video output
- 24 Screen saver – turning on / off
- 24 Setting the digital output
- 25 Night mode – turning on / off
- 25 Restoring the original settings
- 27 Changing the password
- 28 Tuning to radio stations
- 28 Presetting radio stations
- 28 Automatic presetting
- 28 Manual presetting
- 28 Selecting a preset radio station
- 28 Deleting a preset radio station
- 29 Changing tuning grid
- 29 Setting the Sleep timer
- 30 Sound Control
- 30 Selecting surround sound
- 30 Selecting digital sound effects
- 30 Volume Control
- 30 Dimming system’s display screen
- 30 television