Using the Setup Menu. Philips mrd120, MRD120 - Av Systems

Using the Setup Menu

This DVD setup is carried out via the TV, enabling you to customise the DVD system to suit your particular requirements.

DVD Setup Menu Options

Setting the video output

Choose the type of video output that matches the video connection between the DVD system and your TV.

Stop playback, then follow the steps of

“Using the Setup Menu” and select :

> V

IDEO

O

UT

4

,

1

In disc mode, press SYSTEM MENU.

➜ Playback will pause.

2

Highlight icon and press 4 to enter the setup menu. Then press 3 4 to select one of the setup menu options and press 2 to enter the menu.

SETUP MENU

Picture Setup

Sound Setup

Language Setup

Feature Setup

3

Use 1 2 3 4 keys on the remote to navigate in the menu.

4

Press OK to confirm your selection.

TV SHAPE

TV SYSTEM

VIDEO OUT

SCR SAVER

S-VIDEO

PR PB Y / SCART

SET VIDEO OUTPUT

S-VIDEO

Select this if you have connected the

DVD system to your TV using the

S-Video jack.

PR PB Y / SCART

Select this if you have connected the

DVD system to your TV using component video jacks. (SCART – this feature is not available for this model).

Helpful Hint:

– You do not need to adjust the video output setting if you are using CVBS jack (yellow) to connect the DVD system to your TV.

NOTE:

Some of the features in the Setup

Menu are described in “Getting

Started”.

TIPS: To return to the previous menu, press

1.

To remove the menu, press SYSTEM MENU.

23