advertisement
Disc Operations
Selecting various repeat functions
Repeat play mode
● While playing a disc, press REPEAT to select various repeat mode.
➜ "
REPEAT
” icon will appear on the display, except REPEAT OFF mode.
DVD
CHAPTER REPEAT ON ™
TITLE REPEAT ON ™ REPEAT-OFF
VCD/SVCD/CD
REPEAT-ONE (repeat the current track) ™ REPEAT-ALL ™
REPEAT-OFF
MP3
REPEAT-ONE ™ REPEAT-ALBUM ™
REPEAT-ALL ™ REPEAT-OFF
Helpful Hint:
– For VCD, repeat playback is not possible if the PBC mode is switched on.
Programme favourite tracks
(audio CDs and VCDs)
You can play the contents of the disc in the order you want by programming the order of the tracks to be played. Up to 99 tracks can be stored.
1
Stop playback, then press PROG on the front panel to enter programme mode.
2
Use the numeric keypad (0-9) to enter a valid track number.
➜ "
FULL" will appear if you have programmed 99 tracks.
3
Press OK to store the track.
4
Repeat steps
2
~
3
to select other tracks.
5
Press ÉÅ to start programme playback.
6
Press Ç to stop playback or exit programme mode.
Repeating a section within a chapter / track
1
While playing a disc, press REPEAT A-B at the starting point.
2
Press REPEAT A-B again at the point to end the section.
➜ The section A and B can be set only within the same chapter/track.
➜ The section will now repeat continuously.
3
Press REPEAT A-B again to resume normal playback.
Clearing the programme
● Stop playback, then press the Ç again.
➜ " PROG CLR" appears.
Helpful Hints:
– If the DVD system is disconnected from the power supply, it will erase the programme.
– For VCD, the programme option is only possible if the PBC mode is turned off.
20
TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.
advertisement
Related manuals
advertisement