236
Selecting Capture Mode Settings to
Save in the Camera
You can select which settings to save when the camera is turned off.
The following settings can be saved: Flash mode, Drive mode, White
Balance, Sensitivity, EV Compensation, Flash Exp. Comp., Auto Bracket,
Playback Display and File No. The default setting is all [On].
1
Select [Memory] in the [A Rec. Mode] menu.
2
Press the four-way controller
(5).
M e m o r y
The memory screen appears.
F l a s h M o d e
D r i v e M o d e
W h i t e B a l a n c e
S e n s i t i v i t y
E V C o m p e n s a t i o n
F l a s h E x p . C o m p .
MENU 1/2
3
Use the four-way controller (23) to choose an item.
4
Use the four-way controller (45) to select O (On) or P
(Off).
5
Press the 3 button twice.
The camera is ready to take a picture.
10
[File No.] sets whether to save a sequential number for the file name. See
“Selecting the File Number Setting” (p.230).
11
Resetting to Default
Settings
Resets the camera settings.
Resetting Rec. Mode/Playback/Set-up Menu ...238
Resetting the Custom Function Menu ..............239
Resetting Other Settings ...................................240
