Error Messages
261
Error Message
Memory card full
No image
Camera cannot display this image
No card in the camera
Memory card error
Card not formatted
Card locked
The card is electronically locked
This image cannot be enlarged
This image is protected
Battery depleted
Not enough battery remaining to clean sensor
Description
The SD Memory Card is full and no more images can be saved. Insert a new SD Memory Card or
delete unwanted images. (p.40, p.70)
You may be able to save new images by converting to JPEG format or changing the JPEG
record pixels or JPEG quality setting. (p.156,
p.157)
There are no images for playback on the SD
Memory Card.
You are trying to play back an image in a format not supported by this camera. You may be able to play it back on another brand of camera or your computer.
The SD Memory Card is not inserted in the
camera. (p.40)
The SD Memory Card has a problem, and image capture and playback are impossible. It may be viewable on a PC but not with this camera.
The SD Memory Card you have inserted is unformatted or has been formatted on a computer or other device and is not compatible with this camera. Use the card after formatting it
with this camera. (p.218)
A locked SD Memory Card is inserted in the
camera. Unlock the SD Memory Card. (p.41)
Data is protected by the SD Memory Card security feature.
You are trying to enlarge an image that cannot be enlarged.
You are trying to delete an image that is protected. Remove protection from the image.
(p.189)
The battery is exhausted. Install a charged
battery in the camera. (p.35)
Appears during sensor cleaning if the battery level is insufficient. Replace the battery with a charged one or use an AC adaptor D-AC50
(optional). (p.39)
12
262
12
Error Message
Not enough battery remaining to activate Pixel Mapping
Image folder cannot be created
The image is not stored
Settings not stored
NG
Rotation information cannot be saved to this image
No more images can be selected
This RAW file cannot be developed
This image cannot be filtered
No DPOF files
Printer error
No paper in the printer
Printer settings are changed
Low paper level in the printer
Low ink level in the printer
Description
Appears during pixel mapping if the battery level is insufficient. Replace the battery with a charged one or use an AC adaptor D-AC50 (optional).
(p.39)
The maximum folder number (999) and file number (9999) are being used, and no more images can be saved. Insert a new SD Memory
Card or format the card. (p.218)
The image could not be saved because of an SD
Memory Card error.
The DPOF settings or rotated image could not be saved because SD Memory Card is full. Delete unwanted images and perform DPOF settings or
rotation again. (p.70)
The camera was unable to measure the manual white balance or detect dust on the sensor. Try
the operation again. (p.163, p.252)
New rotation information cannot be saved to an image without rotation information.
You cannot select 100 or more images to delete
or edit at a time. (p.186, p.198)
RAW files captured with other cameras cannot be edited on this camera.
Appears when digital filter is started from Fn menu for images captured with other cameras.
No file set with DPOF. Set DPOF and then print.
(p.204)
There is an error with the printer and the file cannot be printed. Fix all the errors and try printing again.
Printer has run out of paper. Put paper in the printer and print.
The camera received notification that the printer status has changed. Press the 4 button to reconnect to the printer.
Printer is running out of paper. This appears when this signal is received from the printer. After two seconds, the printer resumes printing.
Printer is running out of ink. This appears when this signal is received from the printer. After two seconds, the printer resumes printing.
Error Message
No ink in the printer
Paper stuck in the printer
Data error
Turn the power off
Description
Printer has run out of ink. Replace ink and print.
Paper is jammed in the printer. Remove paper and print.
A data error has occurred during printing.
This appears when exiting the PictBridge mode.
Turn the main switch off.
263
12
