216
Using Pixel Mapping
Pixel mapping is a function for mapping out and correcting for defective pixels in the CCD.
1
Select [Pixel Mapping] in the [R Set-up] menu.
2
Press the four-way controller
(5).
P i x e l M a p p i n g
F o r c h e c k i n g t h e i m a g e s e n s o r a s s e m b l y t o m a k e a d j u s t m e n t s
P i x e l M a p p i n g
C a n c e l
OK
3
Press the four-way controller (23) to select [Pixel
Mapping] and press the 4 button.
Defective pixels are mapped and corrected.
When the battery level is low, [Not enough battery remaining to activate Pixel
Mapping] is displayed on the monitor. Use the AC adapter D-AC76 (optional) or use batteries with ample power remaining.
10
