Getting to Know Your Workabout Pro4 2 - 9
Sliding lock
Lock icon
• Place the stylus on the sliding lock, flick it to the right and release to unlock the touchscreen and display the screen options.
Indicators
The Workabout Pro4 uses a LED (Light Emitting Diode), onscreen messages, and audio tones as indicators.
LED
The Workabout Pro4 is equipped with a single, orange coloured LED. This section outlines what the
LED indicates.
Charge LED Behaviour
3 flashes, pause, repeat
Rapid blinking for 1 second
Fast blip (500 ms period, 13% duty cycle)
Slow blink (2 second period, 50% duty cycle)
Solid Orange
Indication
‘Power on’ was attempted. Unit will retry.
Reset or resume is being ignored because the battery door is open. If the door is closed during this process, reset or resume will proceed normally.
Windows is in “unattended mode”.
Charge temperature fault.
Booting/resuming.
Audio Indicators
The Workabout Pro4 supports several audio options, including a Bluetooth headset. Sounds are emitted through the front receiver. The beeper provides a variety of sounds and can be configured to emit a sound to signal a number of events such as screen taps, notifications, and so on. Information on configuring sounds is
detailed in Sounds Tab on page 4-9
.
Inserting the microSD Card and SIM Card
There are two slots available when the battery is removed from the battery compartment — the smaller slot to the left is used to load the microSD (Secure Digital) card, which provides additional non-volatile memory to your Workabout Pro4, and the slot to the right is used to load a SIM (Subscriber Identity Module) card, which allows access to the Voice option, access to the Internet, and so on.
