advertisement
▼
Scroll to page 2
of 114
EPA WARRANTY USA ONLY
Customer Assistance:
If you have any questions regarding your warranty rights and responsibilities or would like information on the nearest authorized Yanmar dealer or distributor, you should contact Yanmar Marine USA
Corporation for assistance.
Yanmar Marine USA Corporation
101 International Parkway
Adairsville, GA 30103 USA
Telephone: 770-877-9894
Fax: 770-877-7567
102 YM Series Operation Manual
© 2009 Yanmar Marine International
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download PDF
advertisement
Table of contents
- 8 Record of Ownership
- 10 Safety Precautions
- 10 General Information
- 10 Before You Operate
- 11 During Operation and Maintenance
- 14 Location of Safety Decals
- 15 Yanmar YM Features and Applications
- 16 New Engine Break-In
- 17 Component Identification
- 17 Right Side (from Flywheel) - 2YM
- 17 Left Side (from Flywheel) - 2YM
- 18 Right Side (from Flywheel) - 3YM
- 18 Left Side (from Flywheel) - 3YM
- 19 Right Side (from Flywheel) - 3YM
- 19 Left Side (from Flywheel) - 3YM
- 20 Location of Nameplates
- 21 Function of Major Components
- 22 Control Equipment
- 22 Instrument Panel (Optional)
- 26 Single-Lever Remote Control Handle
- 27 Safety Precautions
- 27 Introduction
- 28 Diesel Fuel
- 28 Diesel Fuel Specifications
- 31 Filling the Fuel Tank
- 32 Bleeding the Fuel System
- 33 Engine Oil
- 33 Engine Oil Specifications
- 34 Engine Oil Viscosity
- 34 Checking the Engine Oil
- 35 Adding Engine Oil
- 35 Marine Gear or Sail Drive Oil
- 35 Marine Gear Oil Specifications
- 35 Sail Drive Oil Specifications - SD
- 36 Checking Marine Gear Oil
- 36 Adding Marine Gear Oil
- 36 Checking and Adding Sail Drive Oil
- 37 Engine Coolant
- 37 Engine Coolant Specifications
- 37 Checking and Adding Coolant
- 40 Cranking the Engine
- 41 Safety Precautions
- 42 Introduction
- 43 Starting the Engine
- 43 Restarting After Starting Failure
- 44 Starting at Low Temperatures
- 44 After the Engine has Started
- 45 Remote Control Handle Operation
- 45 Acceleration and Deceleration
- 46 Shifting the Engine
- 46 Shutting Down the Engine
- 47 Emergency Shutdown
- 48 Checking the Engine After Operation
- 49 Safety Precautions
- 51 Introduction
- 51 Precautions
- 51 The Importance of Periodic Maintenance
- 51 Performing Periodic Maintenance
- 51 The Importance of Daily Checks
- 52 Yanmar Replacement Parts
- 52 Tools Required
- 52 Distributor for Help
- 53 Tightening Fasteners
- 54 EPA Maintenance Requirements
- 54 Applicable Countries
- 54 Emission Standards
- 54 Inspection and Maintenance
- 54 Installing Sample Port
- 56 Periodic Maintenance Schedule
- 60 Emission-Related Parts
- 61 Periodic Maintenance Procedures
- 61 Daily Checks
- 62 After Initial 50 Hours of Operation
- 66 Every 50 Hours of Operation
- 68 Every 100 Hours of Operation
- 69 Every 150 Hours of Operation
- 69 Every 250 Hours of Operation
- 72 Every 1000 Hours of Operation
- 75 Safety Precautions
- 75 Troubleshooting After Starting
- 76 Troubleshooting Information
- 77 Troubleshooting Chart
- 81 Safety Precautions
- 81 Introduction
- 82 Prepare Engine for Long-Term Storage
- 82 Draining the Cooling System
- 85 Principal Engine Specifications
- 85 2YM15 Engine Specifications
- 87 3YM20 Engine Specifications
- 89 3YM30 Engine Specifications
- 91 Marine Gear and Sail Drive Specifications
- 93 Piping Diagrams
- 99 Wiring Diagrams
- 105 System Warranty - USA Only
- 106 Your Warranty Rights and Obligations
- 106 Warranty Period
- 107 Warranty Coverage
- 107 Exclusions
- 107 Owner’s Responsibility
- 108 Customer Assistance
- 109 Non-Road Emission System Warranty
- 109 System Warranty - USA Only