advertisement
Adjusting system settings
Select the System tab from the MAIN MENU to access the system functions described in this section. Use the PREFERENCES menu pane (shown in the figure below) to change the appearance of the on-screen menus and select how your DIRECTV ® Receiver operates with other devices. The PREFERENCES pane also allows you to:
• Set the receiver output channel to channel 3 or 4
• Enable or disable the
INPUT button on your remote control.
• Select English or Spanish language menus.
• Specify your time zone.
• Enable or disable daylight saving time
• Select full or short channel banner style
• Enable or disable Caller ID
PREFERENCES
Install
Signal
Info
Features
VCR
Prefs
Remote
Test
New Card
Upgrade
Watch TV
Main Menu
Fri, Oct 4 1:53PM
Preference Settings
Output Channel
Input Key
Menu Language
Time zone
Daylight Saving
Banner Style
Caller ID
3
On
English
Default
Observed
Short
On
Factory Defaults
Set output channel
Use the Output Channel menu button to toggle between channels 3 and 4, whichever is unused in your area.
Input key enable/disable
The Input Key menu button allows you to turn the remote control INPUT button on and off.
Select menu language
The Menu Language button allows you to display on-screen menus in English
(default) or Spanish.
Caller ID enable/disable
Use the Caller ID menu button to turn the Caller ID feature on and off.
Incoming calls will not be displayed on-screen when the Caller ID feature is
disabled.
Note: You must subscribe to Caller ID service from your telephone company to use this feature.
Restore factory default settings
SELECT the Factory Defaults menu button to restore the PREFERENCES options to the original factory settings.
Antenna , Signal , and Test functions are described Chapter 1 – Getting Started.
Using the menus
31
advertisement
Related manuals
advertisement