advertisement
September 2015
6.7.1.R01 New Hardware Supported
New OmniSwitch 6350 Switches
The Alcatel-Lucent OmniSwitch 6350 family is a series of fixed-configuration Gigabit Ethernet switches available as 24 to 48 port, Power-over-Ethernet (PoE) and non-PoE models in a 1U form factor.
Note: The OS6350 series of switches do not support the same feature set as the OS6250 and OS6450 series.
OS6350.
OS6350-24
The OmniSwitch 6350-24 is a Gigabit, non-stackable LAN switch with support for the following:
• 24 RJ-45 10/100/1000 BaseT ports
• 4 SFP 1-Gigabit ports used for uplinks
• Internal AC power supply
OS6350-P24
The OmniSwitch 6350-P24 is a Gigabit, Power Over Ethernet, non-stackable LAN switch with support for the following:
• 24 RJ-45 10/100/1000 BaseT PoE ports (all ports support 802.3at)
• 2 SFP 1-Gigabit ports used for uplinks
• Internal AC power supply supporting a 380W PoE power budget
OS6350-48
The OmniSwitch 6350-48 is a Gigabit, non-stackable LAN switch with support for the following:
• 48 RJ-45 10/100/1000 BaseT ports
• 2 SFP 1-Gigabit ports used for uplinks
• Internal AC power supply
OS6350-P48
The OmniSwitch 6350-P48 is a Gigabit, Power Over Ethernet, non-stackable LAN switch with support for the following:
• 48 RJ-45 10/100/1000 BaseT PoE ports (all ports support 802.3at)
• 4 SFP 1-Gigabit ports used for uplinks
• Internal AC power supply supporting a 780W PoE power budget
Transceivers
SFP-GIG-BX-D20/U20 and SFP-GIG-BX-D40/U40
Now supported on OS6250 SFP fixed/combo ports.
Page 6 of 24 OmniSwitch 6250/6350/6450 —Release 6.7.1.R01
September 2015
6.7.1.R01 New Software Features and Enhancements
The following software features are new with the 6.7.1.R01 release, subject to the feature exceptions and problem reports described later in these release notes:
Feature Platform License
Chassis / System
Monitor Interswitch Stack Connections
Layer 2
Prioritization of ERP Packets
Layer 3
IPv6 Supported RFC / IPv6 Phase 2
IPv6 Security Source Guard
IPv6 Security RA Guard
IPv6 DHCP Relay
IPv6 DHCP Snooping and Remote Circuit ID
Management
RCL – DHCP Server Priority
Metro
CPE Test Head enhancements
Security
Critical Voice VLAN when Radius is Down
OS6250/6450
OS6250/6450
OS6250/6350/6450
OS6250/6350/6450
OS6250/6350/6450
OS6250/6350/6450
OS6250/6350/6450
OS6250/6350/6450
OS6250/6450
OS6250/6350/6450
Feature Summary Table
Metro
Page 7 of 24 OmniSwitch 6250/6350/6450 —Release 6.7.1.R01
advertisement
Related manuals
advertisement
Table of contents
- 4 Memory Requirements
- 4 Miniboot and FPGA Requirements for Existing Hardware
- 6 New OmniSwitch 6350 Switches
- 6 OS6350-24
- 6 OS6350-P24
- 6 OS6350-48
- 6 OS6350-P48
- 6 Transceivers
- 8 Chassis / System
- 8 Monitor Interswitch Stacking Connections
- 8 Layer 2
- 8 Prioritization of ERP Packets
- 8 Layer 3
- 8 IPv6 Supported RFCs / IPv6 Phase 2 Logo
- 8 IPv6 Security - Source Guard
- 8 IPv6 Source Filtering is an IPv6 security feature. When IPv6 source guard is enabled on an interface, all unknown IPv6 traffic coming in on the interface is sent to the CPU. The software looks up the IPv6 source address to source MAC address in a bind...
- 8 IPv6 source filtering applies to DHCPv6 Snooping ports, link aggregates, and VLANs and restricts port traffic to only packets that contain the client source MAC address, IPv6 address, and VLAN combination. The DHCPv6 Snooping binding table is used to ...
- 8 IPv6 Security – Router Advertisement (RA) Guard
- 9 IPv6 DHCP Relay/snooping/circuit-id
- 9 Management
- 9 RCL- DHCP Server Priority
- 10 Metro
- 10 CPE Test Head enhancements
- 10 Security
- 13 QoS
- 13 System
- 14 CMM (Primary Stack Module) and Power Redundancy Feature Exceptions
- 14 Stack Element Insert/Removal Exceptions
- 14 Hot Swap / Insert of 1G/10G Modules on OS6450
- 16 OmniSwitch Upgrade Overview
- 16 Prerequisites
- 16 OmniSwitch Upgrade Requirements
- 17 Upgrading to AOS Release 6.7.1.R01
- 17 Summary of Upgrade Steps
- 18 Upgrading - Step 1. FTP the 6.7.1.R01 Files to the Switch
- 19 Upgrading - Step 2. Upgrade Uboot/Miniboot and AOS
- 20 Upgrading - Step 3. Upgrade the CPLD
- 21 Verifying the Upgrade
- 21 Verifying the Software Upgrade
- 21 Verifying the U-Boot/Miniboot and CPLD Upgrade
- 22 Remove the CPLD and Uboot/Miniboot Upgrade Files
- 23 OmniSwitch Downgrade Overview
- 23 Prerequisites
- 23 OmniSwitch Downgrade Requirements
- 23 Summary of Downgrade Steps
- 24 Downgrading - Step 1. FTP the 6.6.5 Files to the Switch
- 24 Downgrading - Step 2. Downgrade the AOS
- 24 Verifying the Downgrade