Scorpion Dual User Manual Rev. 1 Multi-Language

Mounting

Before mounting the product, read and follow the safety recommendations indicated in

the Safety Notes .

Orientation

The Scorpion™ Dual must be mounted in a position that includes planning for safe laser usage. In addition, make sure adequate ventilation is provided around the product.

Rigging

• Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming.

• Make sure that the structure or surface onto which you are mounting the product can

support the product’s weight (see the Technical Specifications ).

• When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, such as an elevated platform or a truss.

• When rigging the product onto a truss, you should use a mounting clamp of appropriate weight capacity. The bracketed has a 13-mm hole, which is appropriate for this purpose.

• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs manually.

Using tools could damage the knobs.

Mounting Clamp

Mounting Bracket

Safety Cable

Page 14 of 66

Bracket

Adjustment

Knob x2

Surface

Supports

Scorpion™ Dual User Manual Rev. 2