- Computers & electronics
- Audio & home theatre
- Supplementary music equipment
- Panasonic
- WJ-NV300K/G
- Installation Guide
advertisement
Preface
The network disk recorders WJ-NV300K and WJ-NV300K/G (hereinafter, recorders) are designed for use within a surveillance system, and record images/audio from up to 32 network cameras (hereinafter, cameras) on the hard disk drives. Number of cameras to be used in the system (9 cameras in basic system) can be increased to 16, 24 and 32 (maximum) by purchasing the
Additional Camera Kit (WJ-NVE30, WJ-NVE30W).
Model No.
WJ-NV300K
WJ-NV300K/G
HDD slot(s)
2
2
Number of initial CHs/Maximum number of CHs RAID function
16CH/32CH Available (*)
9CH/32CH Available (*)
(*) RAID5 or RAID6 mode is available when the Extension Unit (WJ-HDE400) is connected.
(When the Extension Unit is connected, the HDD of the recorder is disabled.)
If the Extension Unit is not connected, the mirroring mode can be used with two HDDs of the recorder.
(But the HDD of the Extension Unit is not available for the mirroring mode.)
This recorder supports connection with a monitor equipped with the HDMI (High-Definition Multimedia Interface) connector.
Connection using an HDMI cable (optional) offers display of playback/live images with superior quality.
It is possible to operate cameras from this recorder to display images from multiple cameras or switch cameras from which images are to be displayed, etc.
The optional parts described in this installation guide are based on information as of May, 2014. Contact your dealer for further information.
Features
High-definition image monitoring is available
Images from up to 32 cameras with the image capture size of Full HD (1920 x 1080) can be saved as video data. Recording of images with the image capture size of QXGA (2048 x 1536) and of images with the frame rate of 60fps are also available. This recorder also supports the HDMI output to 2 monitors that can display recorded images and live images from the cameras in high definition.
Quick setup and operations
By connecting the mouse (accessory) to this recorder, quick operations are available while viewing a monitor.
By using "Easy Start", the cameras are automatically recognized without operations from the PC.
Recorded images can easily be searched using calender or time line.
Real-time face matching function (option)
By matching registered face images with a face displayed on live images in real time and by notifying the matching result, it will be possible to check guests or discover suspicious people. That can be an aid to crime prevention.
HDD extension unit
By connecting 2 extension units (WJ-HDE400), operation using up to 20 hard disk drives in the single mode, up to 18 hard disk drives in the RAID5 or RAID6 mode will become available.
SDHC/SD memory card slot and the copy port equipped
It is possible to copy images recorded onto a SDHC/SD memory card (optional) or onto a commercially available external hard disk drive/USB memory. The copied images can be played, printed or saved using the dedicated viewer software.
(Recommended SDHC/SD memory card ☞ page 46)
7
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Limitation of liability
- 4 Disclaimer of warranty
- 4 Warranty for U.S
- 5 Important safety instructions
- 7 Preface
- 7 Features
- 8 About the user manuals
- 9 System requirements for a PC
- 9 Trademarks and registered trademarks
- 10 Abbreviations
- 10 GPL/LGPL
- 10 Copyright
- 10 Network security
- 11 About the face matching function (option)
- 11 Notation about the installation and setup of the camera
- 14 Precautions
- 17 Precautions for installation
- 18 Major operating controls and their functions
- 18 Front view
- 20 Rear view
- 22 User/Host management
- 22 When operating from a PC via a network
- 23 Operations flow
- 24 Connection
- 24 Connection of cameras
- 25 Connection of monitors
- 26 Connection of a PC
- 28 Connection of extension units
- 29 About the connector
- 29 How to use the terminals of the ALARM/CONTROL connector
- 31 Time and polarities of the ALARM/CONTROL connector
- 32 Installation or replacement of the hard disk drives
- 32 Install the hard disk drives
- 33 Replace the hard disk drives
- 34 Turn on the recorder
- 34 Turn on the power of the recorder
- 35 Turn off the power of the recorder
- 36 Register the license (Registration Key)
- 38 Basic operations
- 40 Setup menu
- 41 Configure the minimum settings [Easy Start]
- 44 Troubleshooting
- 46 Specifications
- 47 Standard accessories