3. Useful Functions

This chapter describes the useful functions of the projector.

Projecting an Image at a Specified Time

Using the power timer function, you can set the projector to project images at a specified time.

This section explains how to set the projector to project images automatically from 9:00 to 18:00 every

Sunday as an example.

1.

Press the [Menu] button.

2.

Select [Default Settings 2], and then press the [ ] button.

DPE020

3.

Select [Power Timer], and then press the [Enter] button.

4.

If [Current Time] is not set, set the current date and time.

5.

Select [Power Timer], and then press the [Enter] button.

6.

Select [On], and then press the [Enter] button.

DPE015

7.

Select [Projection Day], and then press the [Enter] button.

41

3. Useful Functions

8.

Select a day to project images (Sunday in this example), and then press the [Enter] button.

9.

Select [OK], and then press the [Enter] button.

10.

Select [Projection Time], and then press the [Enter] button.

11.

Specify the startup time (for example: 9:00) using the number buttons.

You can also use the [ ] and [ ] buttons to specify the startup time.

12.

Specify the end time (for example: 18:00) using the number buttons.

You can also use the [ ] and [ ] buttons to specify the end time.

13.

Press the [Enter] button.

14.

Press the [Menu] button twice to close the menu screen.

15.

Press the [Power] button.

42

The confirm screen appears.

16.

Press the [Power] button.

The projector beeps and enters the standby mode.

• Do not disconnect the power cord when using the power timer function. The projector cannot start if the power cord is disconnected.