operation manual

GETTING STARTED

PART NAMES

Color monitor master station (IS-MV)

■ Control panel

Handset (→P. 20) Hook switch

TRANSFER button < TRANSFER > and LED (red) (→P. 23)

Press to transfer a call (or communication) to another master station.

PRIVACY button < PRIVACY > and

LED (red) (→P. 24)

Press to turn on the PRIVACY function.

LIST button < LIST > (→P. 26)

Press to display the list of the registered stations (or zones).

SETTING button < SETTING > (→P. 14)

Press to display the setting items.

Dial keys (→P. 27)

Used to enter the number or name of a station or zone you want to search for.

Speaker

Call tones and communication sounds are heard from this.

Color LCD monitor

See the next page for details.

Status LED (red)

Indicates the current status of the master station by lighting up or fl ashing on/off in red (while initializing the system, being called, communicating, etc.).

* This may blink when you do not answer a call, though it is not a failure.

Name card and name plate

Write down the names of stations, zones, etc. registered to the speed dial buttons on the card and set it under the transparent name plate.

Speed dial buttons (1 to 6)

(numbered beginning at the top)

(→P. 30)

Register stations and/or zones you call or select frequently to each of these buttons. You can select a station or zone simply by pressing the corresponding button.

Reset button

(under the name card)

Press to reset the master station.

* Do not touch this button.

Microphone

Sends sounds from the master station to other stations.

OFF button < OFF > (→P. 19)

Press to fi nish communication, monitoring or calling.

ADJUST button < ADJUST > (→P. 22)

Adjusts the image on the monitor when it is hard to see in the daytime or darkness.

ZOOM/WIDE button < ZOOM/WIDE > (→P. 21)

Switches the display mode between zoom and wide.

MONITOR button < MONITOR > (→P. 32)

Press to monitor the selected sub station or start scan-monitoring.

TALK button < TALK > (→P. 19)

Press to answer a call or call the selected station.

Transmit LED (red) (→P. 19)

Lights up in red while you are talking to the target station, and turns off while you are hearing the sound at the target station or no communication is made.

(Pan & Tilt control button) (→P. 21)

Moves the image on the monitor from right to left or up and down.

Door release button < > (→P. 24)

Press to unlock the door connected to the received sub station.

6

* The notation in < > is used for operational description in this manual.