6. Base settings. Motorola D411, D4, D412, D403, D401, D414, D413, D404

6. Base settings

Choose from 5 volume levels or Off.

1. Press m

, scroll d

to SETUP and press m

. The display shows BASE VOLUME .

2. Press m .

3. Press

4. Press u

or d

to select the volume (1 - 5 or OFF ).

m

to confirm or b

to return to the previous menu.

6.2 Base ringer melody

Choose from 5 different base ringer melodies.

You will hear a sample ring as you scroll to each ringer melody.

1. Press m , scroll d

to SETUP and press m .

2. Scroll d

to BASE MELODY and press m

.

3. Press

4. Press u

or d

to select the ringer melody (1 - 5).

m to confirm or b

to return to the previous menu.

6.3 Change base PIN code

Some functions are protected by a 4 digit PIN code which must be entered if you want to change the settings. The default PIN is 0000. You can change this to your own preferred number.

When you enter a PIN, the digits are shown as ****.

1. Press m

, scroll d

to SETUP and press m

.

2. Scroll d

to PIN CODE and press m

.

3. Enter the 4 digit PIN code (default = 0000) and press m .

4. Enter the new PIN and press m to confirm.

5. Re-enter the new PIN and press m

to confirm.

IMPORTANT

If you change the PIN code, please keep a record of the new number.

Your D4 is set to tone dialling. You should only need to change this if connected to an older type of switchboard / PBX which requires pulse dialling.

1. Press m , scroll d to SETUP and press m .

2. Scroll d

to DIAL MODE and press m .

3. Press u

or d

to select TONE DIAL or PULSE DIAL and press m

to confirm.

24 Base settings