6 Hydraulic module. Thermoplan fox2

The Thermoplan FOX2 is a coffee maker designed for commercial use. It features a touchscreen interface for easy operation, two bean hoppers for different coffee blends, and a built-in milk frother. The machine also includes a cleaning system to ensure optimal performance and hygiene.

PDF

Document

Key features

Touchscreen interface
Two bean hoppers
Built-in milk frother
Cleaning system

Frequently asked questions

Possible problems with the touchscreen include: slow reaction, flickering, missing product buttons, unreadable hieroglyphics instead of text, machine not starting completely, blue box with error message, black screen, or white screen.

To troubleshoot touchscreen problems, follow these steps: Switch off the machine, wait 10 seconds, switch it back on. If this doesn't fix it, remove the CF card, check for defects in the CF card slot, reinsert the card, and switch on the machine. If the problem persists, check the CF card type. Finally, check the LEDs on both the CPU and FOX-Print. If they don't blink, unplug the connection cable, control the contacts on both devices, plug the cable back in, and switch the machine on.

If the machine shows "Empty grounds drawer" error, the grounds drawer might be full, the magnet might be missing, the magnet switch might be defective, or the cable between the magnet switch and CPU might have a short circuit.