advertisement
3_Electrolux_EN230_MS_AJ26_Layout 1 16/10/2015 08:13 Page 74
74 www.electrolux.com
9.
INSTALLATION
The microwave can be fitted in position A or B:
A B
Position
A
B
Niche size
W D H
562 x 550 x 450
562 x 500 x 450
Measurements in (mm)
Conventional oven
9.1
Installing the appliance
4 mm 4 mm
4 mm
1.
Remove all packaging and check carefully for any signs of damage.
2.
Fit the fixing hooks to the kitchen cupboard using the instruction sheet and template supplied.
3.
Fit the appliance into the kitchen cupboard slowly, and without force. The appliance should be lifted onto the fixing hooks and then lowered into place. In the case of interference during fitting, this hook is reversible. The front frame of the oven should seal against the front opening of the cupboard.
4.
Ensure the appliance is stable and not leaning. Ensure that a 4 mm gap is kept between the cupboard door above and the top of the frame (see diagram).
3_Electrolux_EN230_MS_AJ26_Layout 1 16/10/2015 08:13 Page 75
ENGLISH 75
9.2
Connecting the appliance to the power supply
(A)
• The electrical outlet should be readily accessible so that the unit can be unplugged easily in an emergency. Or it should be possible to isolate the oven from the supply by incorporating a switch in the fixed wiring in accordance with the wiring rules.
• The socket should not be positioned behind the cupboard.
• The best position is above the cupboard, see (A).
• Connect the appliance to a single phase 230 V/50 Hz alternating current via a correctly installed earth socket.
The socket must be fused with a 10 A fuse.
• The power supply cord may only be replaced by an electrician.
• Before installing, tie a piece of string to the power supply cord to facilitate connection to point (A) when the appliance is being installed.
• When inserting the appliance into the high-sided cupboard, DO NOT crush the power supply cord.
• Do not immerse the power supply cord or plug in water or any other liquid.
9.3
Electrical connections
WARNING!
THIS APPLIANCE MUST BE
EARTHED
The manufacturer declines any liability should this safety measure not be observed.
If the plug that is fitted to your appliance is not suitable for your socket outlet, you must call your local service agent.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 WICHTIGE SICHERHEITSHINWEISE
- 9 GERÄTEÜBERBLICK
- 10 BEDIENBLENDE
- 10 VOR DER ERSTEN INBETRIEBNAHME
- 13 BEDIENUNG DES MIKROWELLENGERÄTS
- 18 PROGRAMMTABELLEN
- 23 REINIGUNG & PFLEGE
- 24 WAS TUN, WENN
- 25 AUFSTELLANWEISUNGEN
- 27 TECHNISCHE DATEN
- 27 UMWELTINFORMATION
- 29 BELANgRIjKE AANWIjZINgEN M.B.T. DE VEILIghEID
- 35 OVERZIChT VAN hET APPARAAT
- 36 BEDIENINgSPANEEL
- 36 VóóR hET IN gEBRUIK NEMEN
- 39 WERKINg VAN DE MAgNETRON
- 44 PROgRAMMA’S
- 49 REINIgINg & ONDERhOUD
- 50 WAT TE DOEN ALS
- 51 INSTALLATIE-AANWIjZINg
- 53 TEChNISChE gEgEVENS
- 53 MILIEUINFORMATIE
- 55 SAFETY INFORMATION
- 60 PRODUCT DESCRIPTION
- 61 CONTROL PANEL
- 61 BEFORE FIRST USE
- 63 OPERATION
- 67 PROGRAMME CHARTS
- 72 CARE AND CLEANING
- 73 TROUBLESHOOTING
- 74 INSTALLATION
- 76 TECHNICAL INFORMATION
- 76 ENVIRONMENT CONCERNS
- 79 AVERTISSEMENTS IMPORTANTS DE SÉCURITÉ
- 86 VUE D’ENSEMbLE DE L’APPAREIL
- 87 bANDEAU DE COMMANDE
- 87 AVANT LA MISE EN SERVICE
- 90 UTILISATION
- 94 TAbLEAUX DE PROgRAMMATION
- 99 ENTRETIEN ET NETTOyAgE
- 100 EN CAS D'ANOMALIE DE FONCTIONNEMENT
- 101 INSTALLATION
- 103 CARACTÉRISTIQUES TECHNIQUES
- 103 INFORMATIONS ENVIRONNEMENTALES
- 104 INSTRUçõES dE SEgURANçA
- 111 dESCRIçãO gERAL dO APARELhO
- 112 PAINEL dE CONTROLO
- 112 ANTES dA PRIMEIRA UTILIzAçãO
- 115 FUNCIONAMENTO dO FORNO MICROONdAS
- 119 gRáFICOS dE PROgRAMAS
- 124 CUIdAdOS E LIMPEzA
- 125 O QUE FAzER SE
- 126 INSTALAçãO
- 128 ESPECIFICAçõES
- 128 INFORMAçõES AMbIENTAIS