Assembly. StyleWell 18-927-175-Y

Assembly

1

Attaching connectors

□ Locate the left trim (K), right trim (L), top trim (M), and base trim (F) and place on soft surface to protect the finish.

□ Attach five connectors (DD ) to left trim (K), right trim (L),

top trim (M), and base trim (F) by turning the five bolts

(AA) clockwise through the connector. Do not strip the bolts (AA) by overtightening.

AA

DD

K

L

F

2

Attaching the trim to side panels

□ Locate the left side panel (H) and right side panel (J) and place on soft surface to protect the finish.

□ Attach the left trim (K) and right trim (L) to the side panels (H & J) (by turning the bolts (AA) clockwise through the connector. Do not strip the bolts (AA) by overtightening.

AA

L

M

K

H

J

6 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

3

Attaching the base trim to base panel

□ Locate the base panel (B) and place on a soft surface to protect the finish.

□ Attach the base trim (F) to the base panel (B) by turning four bolts (AA) clockwise through the connectors. Do not trip the bolt (AA) but overtightening.

□ Attach the two support panels (G) to the base panel (B) turning four bolts (AA) clockwise through the connector. Do not strip the bolts (AA) by overtightening.

AA

F

G

G

B

4

Attaching top trim to side panels

□ Insert four wood dowels (BB) into the unthreaded holes in the top trim (M)

□ Line up the four wood dowels (BB) in the top trim (M) with the unthreaded holes in the left and right side panel

(J & H).

□ Press together firmly until flush.

J

M

BB

H

7

Assembly (continued)

5

Attaching side panels to base

□ Insert four wood dowels (BB) into the unthreaded holes in the base (B).

□ Line up the four wood dowels (BB) in the base (B) with the unthreaded holes in the left and right side panels.

□ Press left and right side panels down until flush.

□ Insert four bolts (AA) into the connectors on the side panels and turn clockwise. Do not strip the bolts (AA) by overtightening.

AA

J

BB

B

H

6

Attaching the media shelf

□ Line up the connectors on the side panels (J & H) with holes on the media shelf (C).

□ Attach the media shelf to the base assembly by inserting seven bolts (AA) through the connector in the side panels and turning clockwise. Do not strip the bolts (AA) by overtightening.

8 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Assembly (continued)

7

Attaching front and side panels to media shelf

□ Insert four wood dowels (BB) into the unthreaded holes in the media shelf (C).

□ Line up the four wood dowels (BB) in the media shelf with the unthreaded holes in the upper side panel (E).

□ Press together firmly until flush.

□ Insert four bolts (AA) into the connector on the upper side panels (E).

□ Attach the upper side panels (E) to the media shelf (C) by turning the bolts (AA) clockwise. Do not strip the bolts

(AA) by overtightening.

8

Attaching top panel to assembly

□ Locate the top panel (A) and place on a soft surface to protect the finish.

□ Insert four wood dowels (BB) into the unthreaded holes in the side panels.

□ Line up the four wood dowels (BB) in the side panels with the unthreaded holes in the top panel (A).

□ Press together firmly until flush.

□ Insert four bolts (AA) into the connector on the upper side panels.

Attach the upper side panels to the top panel (A) by turning the bolts (AA) clockwise with screw drive (FF).

Do not strip the bolts (AA) by overtightening.

9

Assembly (continued)

9

Attaching the back panels

□ Locate the back panel (D) and line them up to the back of the media console with the finished side facing in.

□ Insert and tighten ten back panel screws (CC) to attach the back panel (D) the media console.

□ Do not strip the screws (CC) by overtightening.

10

Installing the firebox

□ Insert the firebox into the media console through the back opening.

□ Push the firebox forward through the back opening until the metal trim of the firebox in flush with the side panels (J & H).

□ Once the firebox is in position attach the two mounting brackets included with the firebox by inserting and tightening six screws through the mounting brackets into the media console.

Do not strip the screws by overtightening.

CC

D

10 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.