28 BASIC SA FET Y INSTRUC TIONS
2.4.5 Gas, dust, steam, smoke 2.4.6 Hydraulics, pneumatics
•
Diesel engine exhaust emissions are toxic in concentrated amounts. Do not operate the wheel loader in enclosed spaces or inadequately ventilated spaces.
•
Determine and follow regulations regarding safe operation at the specific work site.
-
Do not operate the wheel loader near open flames.
- Do not perform welding repairs in explosive atmospheres.
- Do not weld fuel reservoirs or fuel system components.
-
Do not perform any welding operation unless qualified to do so.
•
Wear appropriate personal protective equipment (breathing filter, protective suit) for protection against specific dangers, e.g. poisonous gases, corrosive steam, poisonous (i.e. containing toxins) surroundings, etc.
•
When detected, oil leaks shall be repaired to avoid:
- environmental hazards
fire hazards
- slip hazards
- explosion hazards
- personal injury hazards.
•
Do not attempt to repair a hydraulic system or component until the hydraulic pressure has been relieved. Relieve the pressure by activating controls as advised in this
Operator’s Manual or the Repair Manual.
• Replace hydraulic lines and fittings with original equip
ment parts from your Wacker Neuson dealer to assure original performance and safety. The reinstalled hydraulic line routing and attachment shall conform to the original routing. Confirm that the replacement routing is not interfering with other parts, chafing across sharp surfaces or resting on or near hot surfaces.
