96 Ope r ating a nd Ope r atiOn
5.4.2 Loader lift arms locking system
•
Before traveling from worksite to worksite over extended distances, engage the loader lift arm lock after selecting the height for the travel arms for the travel segment.
•
Do not release the loader lift arm lock until starting the work cycle, or after parking the loader and prior to lowering the lift arms to the ground with the attachment.
Fig. 40
Switch for the locking mechanism of the loader lift arms
The loader lift arm can be secured against unintentional operation by means of a locking mechanism.
If you have switched on the locking mechanism, the loader lift arms will not move if the loader controls are moved. When the locking mechanism is switched on, the control lamp in the switch lights up (Fig. 40), and it is impossible to activate the loader lift arm.
Activate the loader lift arms locking system by switching the rocker switch (Fig. 40).
•
Switch the rocker switch (Fig. 40) to position 1:
– The locking system is switched on.
•
Switch the rocker switch (Fig. 40) to position 0:
– The locking system is switched off.
