Inserting/Removing an SD Memory
Card
This camera uses a commercially available SD Memory Card, SDHC
Memory Card, or SDXC Memory Card.
Make sure the camera is turned off before inserting or removing the SD
Memory Card.
• Do not remove the SD Memory Card while the card access lamp is lit.
• Do not open the terminal cover and card cover while the camera is in use.
• Use this camera to format (initialize) an SD Memory Card that is unused or
has been used on other devices. Refer to “Formatting an SD Memory Card”
(p.199) for details on formatting.
• Use a high-speed memory card when recording movies. If the writing speed cannot keep up with the recording speed, writing may stop during recording.
1
Make sure that the camera is turned off.
2
Open the terminal cover in the direction of the arrow.
45
2
3
Open the card cover in the direction of the arrow.
46
4
Insert the card all the way with the SD Memory Card label facing toward the monitor.
2
Push the SD Memory Card in once to remove.
5
Close the card cover, and the terminal cover ( 1
→
2 ).
Close both covers properly.
1
2
For details on the approximate number of still pictures and the amount of time
of movies that can be recorded on an SD Memory Card, refer to “Approximate
Image Storage Capacity” (p.255).
