Processing Images
165
Changing the Number of Recorded Pixels
(Resize)
Changes the number of recorded pixels of a selected image, and saves it as a new file.
• Only JPEG images captured with this camera can be resized.
• Images already resized to Z or S with this camera cannot be resized.
1
Select an image to resize in the single image display, and press the four-way controller ( 3 ).
The playback mode palette appears.
2
Use the four-way controller ( 2345 ) to select n
(Resize), and press the 4 button.
The screen to select the recorded pixels appears.
3
Use the four-way controller ( 45 ) to select the number of recorded pixels, and press the 4 button.
You can select one of the image sizes starting from one size smaller than that of the original image. The selectable sizes vary according to the original image size and aspect ratio.
MENU OK
4
Use the four-way controller ( 23 ) to select [Save as], and press the 4 button.
The resized image is saved as a new image.
6
166
6
Cutting Out Part of the Image (Cropping)
Crops out only the desired area of a selected image and saves it as a new image.
• Only JPEG images captured with this camera can be cropped.
• Images already resized to Z or S with this camera cannot be cropped.
1
Select an image to crop in the single image display, and press the four-way controller ( 3 ).
The playback mode palette appears.
2
Use the four-way controller ( 2345 ) to select o
(Cropping), and press the 4 button.
The cropping frame to specify the size and position of the area to crop appears on the screen.
3
Specify the size and position of the area to crop by using the cropping frame.
MENU INFO OK
Available operations
Four-way controller ( 2345 )
E-dial
M button
→
Four-way controller ( 2345 ) m / c button
Moves the cropping frame.
Changes the size of the cropping frame.
Changes the aspect ratio.
Rotates the image from -45° to +45°.
Rotates the cropping frame (only when the cropping frame can be rotated).
4
Press the 4 button.
The save confirmation screen appears.
5
Use the four-way controller ( 23 ) to select [Save as], and press the 4 button.
The cropped image is saved as a new image.
167
Processing Images with Digital Filters
You can edit captured images using digital filters.
The following filters are available.
Filter Name
Monochrome
Extract
Color
Toy
Camera
Retro image.
Creates an image that looks as though it was shot with a toy camera.
Effect
Creates a monochrome
Extracts one or two specific colors and makes the rest of the image black and white.
Creates an image with the look of an old photo.
Parameter
Filter Effect: OFF/Red/Green/Blue/
Infrared Filter
Toning (B-A): 7 levels
Extracted Color 1: Red/Magenta/
Blue/Cyan/Green/Yellow
Extractable Range of Color 1: 1 to 5
Extracted Color 2: OFF/Red/
Magenta/Blue/Cyan/Green/Yellow
Extractable Range of Color 2: 1 to 5
Shading Level: OFF/Low/Medium/
High
Blur: Low/Medium/High
Tone Break: Red/Green/Blue/
Yellow
Toning (B-A): 7 levels
Frame Composite: None/Thin/
Medium/Thick
High
Contrast
Enhances the contrast in the image.
Intensity: 1 to 5
Shading
Color
Tone
Expansion
Sketch
Filter
Water Color
Creates an image with darkened edges.
Invert Color Inverts image colors.
Adds a color filter to the image.
Shading Type: 4 types
Shading Level: -3 to +3
OFF/ON
Color: Red/Magenta/Blue/Cyan/
Green/Yellow
Color Density: Light/Medium/Dark
Creates an image with a unique contrast.
Creates an image that looks as though it was drawn with a pencil.
Creates an image that looks as though it was painted.
Low/Medium/High
Contrast: Low/Medium/High
Scratch Effect: OFF/ON
Intensity: Low/Medium/High
Saturation: OFF/Low/Medium/High
6
168
6
Filter Name
Pastel
Posterization
Miniature
Soft
Starburst
Fish-eye
Slim
Base
Parameter
Adj
Effect
Creates an image that looks as though it was drawn with a crayon.
Lessens the tone of the image to create an image that looks as though it was hand-drawn.
Parameter
Low/Medium/High
Intensity: 1 to 5
Blurs part of the image to create a simulated miniature scene.
Creates an image with a soft focus throughout the image.
In-Focus Plane: -3 to +3
In-Focus Width: Narrow/Middle/
Wide
In-Focus Plane Angle: Side/
Vertical/Positive Slope/Negative
Slope
Blur: Low/Medium/High
Soft Focus: Low/Medium/High
Shadow Blur: OFF/ON
Creates an image with a special sparkling look by adding extra glitter to the highlights of night scenes or lights reflected on water.
Creates an image that looks as though it was shot with a fish-eye lens.
Changes the horizontal and vertical ratio of images.
Effect Density: Small/Medium/Large
Size: Small/Medium/Large
Angle: 0°/30°/45°/60°
Low/Medium/High
-8 to +8
Adjusts the parameters to create the desired image.
Brightness: -8 to +8
Saturation: -3 to +3
Hue: -3 to +3
Contrast: -3 to +3
Sharpness: -3 to +3
Only JPEG and RAW images captured with this camera can be edited with digital filters.
1
Select an image for applying the digital filter in the single image display, and press the four-way controller ( 3 ).
The playback mode palette appears.
2
Use the four-way controller ( 2345 ) to select D (Digital
Filter), and press the 4 button.
The screen to select a filter appears.
3
Use the four-way controller
( 2345 ) to select a filter.
The background image changes according to the selected filter.
You can select a different image by turning the e-dial.
Proceed to Step 6 if you do not need to change the parameters.
4
Press the M button.
The screen to adjust the parameters appears.
5
Use the four-way controller ( 23 ) to select a parameter, and use the four-way controller ( 45 ) to adjust the value.
INFO
OK
169
6
OK
6
Press the 4 button.
The save confirmation screen appears.
MENU
170
7
Use the four-way controller ( 23 ) to select [Apply additional filter(s)] or [Save as], and press the 4 button.
Select [Apply additional filter(s)] when you want to apply additional filters to the same image. The screen that was displayed in Step 3 appears again.
MENU OK
If [Save as] is selected, the filter-processed image is saved as a new image.
Up to 20 filters, including a digital filter used during shooting (p.144), can be
applied to the same image.
6
Recreating Filter Effects
Retrieves the filter effects of a selected image and applies the same filter effects to other images.
1
Select a filter-processed image in the single image display.
2
Select D (Digital Filter) in the playback mode palette, and press the 4 button.
3
Use the four-way controller ( 23 ) to select [Recreating filter effects], and press the 4 button.
The filter effects used for the selected image appear.
MENU OK
4
To check the parameter details, press the M button.
You can check the filter parameters.
Press the 3 button to return to the previous screen.
OK INFO
5
Press the 4 button.
The image selection screen appears.
6
Use the e-dial to select an image to apply the same filter effects, and press the 4 button.
You can only select an image that has not been processed with a filter.
The save confirmation screen appears.
OK MENU
7
Use the four-way controller ( 23 ) to select [Save as], and press the 4 button.
The filter-processed image is saved as a new image.
171
6
If [Searching for the original image] is selected in Step 3 on p.170, the original
image prior to digital filter application can be retrieved. If the original image is no longer stored on the SD Memory Card, the message [Original image, prior to digital filter application, is not found] appears.
172
6
Joining Multiple Images (Index)
Join a number of images together and display them as an index print. You can also save the displayed index print as a new image. You can have the camera select the images to include in the index print or you can select them yourself. The images will be randomly arranged or displayed by file number depending on the layout selected.
1
Press the four-way controller ( 3 ) in the single image display.
The playback mode palette appears.
2
Use the four-way controller ( 2345 ) to select p (Index), and press the 4 button.
The Index setting screen appears.
3
Press the four-way controller
( 5 ), use the four-way controller
( 23 ) to select a layout, and press the 4 button.
You can select o (Thumbnail), p (Square), q (Random1), r (Random2), s (Random3) or p (Bubble).
MENU OK
Images are displayed according to the file number (from the smallest number) for o , and are displayed in random order for other layouts.
4
Use the four-way controller ( 23 ) to select [Images], and press the four-way controller ( 5 ).
5
Use the four-way controller ( 23 ) to select the number of images, and press the 4 button.
You can select 12, 24 or 36 images.
When the number of saved images is smaller than the number selected, empty spaces will appear when [Layout] is set to o and some images may be duplicated for other layouts.
6
Use the four-way controller ( 23 ) to select [Backgrnd.], and press the four-way controller ( 5 ).
7
Use the four-way controller ( 23 ) to select the background color, and press the 4 button.
You can select a white or black background.
8
Use the four-way controller ( 23 ) to select [Selection], and press the four-way controller ( 5 ).
9
Use the four-way controller ( 23 ) to select a type of image selection, and press the 4 button.
u All images w Manual x Folder name
Picks images automatically from all of the images saved.
Lets you select images you want to include in the index image. If w is selected, [Select image(s)] appears and leads you to the image selection screen.
Picks images automatically from the folder selected.
If x is selected, [Select a folder] appears and leads you to the folder selection screen.
10
Use the four-way controller ( 23 ) to select [Create an index image], and press the 4 button.
The index image is created and a confirmation screen appears.
11
Use the four-way controller ( 23 ) to select [Save] or
[Reshuffle], and press the 4 button.
Save
Reshuffle
Saves the index image as a J , P (3072×2048) and
C file.
Reselects the images to be included in the index image and displays a new index image. However, if o
(Thumbnail) is selected for [Layout], this item is not displayed.
After the index image is saved, the camera returns to playback mode and the index image is displayed.
Processing may take a while when creating an index image.
173
6
