Appendix E

AC Power Cord and Connectors

The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications:

Length:

Wire size:

Minimum 1.7 meters

Minimum 0.75 mm 2

Current rating:

Voltage rating:

Minimum 2.5 amperes

125 or 250 VAC

(depending on country/region’s power standards)

Certification agencies

U.S. and Canada: UL listed and CSA certified

No. 18 AWG, Type SVT or SPT-2

Australia:

Japan:

Europe:

AS

DENANHO

Austria:

Belgium:

Denmark:

OVE

CEBEC

DEMKO

Italy:

The Netherlands:

Norway:

IMQ

KEMA

NEMKO

User’s Manual E-1

AC Power Cord and Connectors

Finland:

France:

FIMKO

LCIE

Sweden:

Switzerland:

SEMKO

SEV

Germany: VDE United Kingdom: BSI

In Europe, two conductors power cord must be VDE type, H05VVH2-F or

H03VVH2-F and for three conductors power cord must be VDE type,

H05VV-F.

For the United States and Canada, two pin plug configuration must be a

2-15P (250V) or 1-15P (125V) and three pin plug configuration must be

6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.

The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia and Europe.

USA United Kingdom

User’s Manual

UL approved

Australia

AS approved

Canada

CSA approved

BS approved

Europe

Approved by the appropriate agency

E-2