Setting the local frequency. Raymarine 37STV

81304_1.book Page 29 Tuesday, July 31, 2007 2:44 PM

SAVE ?

YES NO

D7977_2

18. Press YES to accept the data.

Press NO to cancel and return to main set up mode.

1. Verification method.

SIGNAL - use only signal level for tracking.

DVB LOCK - use only DVB Lock signal for tracking.

DVB DECODE - verify satellite using DVB decode method for tracking.

DSS LOCK - decode only DSS Lock signal for tracking.

2. Power supplying method.

AUTO - change voltage to LNB by IRD voltage.

ONLY 13 V - always supply 13 V to LNB.

ONLY 18 V - always supply 18 V to LNB.

3. DiSEqC supplying method.

AUTO - change signal to LNB by IRD DiSEqC.

ONLY 0KHZ - always supply 0 kHz to LNB.

ONLY 22KHZ - always supply 22 kHz to LNB.

29

Setting the local frequency

LNB systems in regions with circular polarization

SET UP MODE ?

YES NO

1. Press YES to enter set up mode.

D7973_2

SET SAT PAIR ?

PREV YES NEXT

D7974_4

SET LOCAL FRQ?

PREV YES NEXT

D7996_2

2. Press NEXT 3 times to enter local frequency mode.

3. Press YES to set local frequency.