advertisement
▼
Scroll to page 2
of
119
![Produce Scanned Images. Kodak RFS 3600, Professional RFS 3600 | Manualzz Produce Scanned Images. Kodak RFS 3600, Professional RFS 3600 | Manualzz](http://s3.manualzz.com/store/data/056072021_1-5d07d545c28ffe0f66d999d03fcd5cef-360x466.png)
6. You see this screen; it has a central set of three tabs (Settings, Color
Balance, and Levels & Curves) surrounded by general controls.
(Refer to Messages if a message indicates that the scanner was not found.)
PRODUCE SCANNED IMAGES
In a typical work session you might follow these summary steps. After the listing below, each step is explained in tutorial form.
A. Establish scanner settings — film type, profiles, color depth, etc. — on the Settings tab.
B. Prescan your filmstrip or slide; image thumbnails appear across the top of the screen.
C. Rotate, flip, and crop as needed.
31
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 2 Using this PDF File
- 7 Important Safeguards and Precautions
- 9 Electromagnetic Emissions
- 10 VCCI Statement
- 10 Disposal Statement
- 11 Energy Star® Statement
- 12 Before You Begin
- 12 Macintosh Computer
- 12 Required Hardware
- 12 Required Software
- 12 PC-compatible Computer
- 12 Required Hardware
- 13 Required Software
- 13 Optional Printers
- 14 Connecting the Scanner to Your Computer
- 14 Connecting the Scanner to a Power Source
- 16 Making a SCSI Connection
- 17 If No External SCSI Devices Are Connected
- 18 If External SCSI Devices Are Connected
- 21 Setting the Scanner SCSI Identification Number
- 23 Making a USB Connection
- 25 Installing Scanner Software
- 26 Loading Filmstrips and␣ Slides
- 26 Filmstrips
- 28 Slides
- 29 Tutorial: Using␣ Scanner␣ Software
- 29 Open Scanner Software
- 31 Produce Scanned Images
- 32 A. Establish Scanner Settings (Settings Tab)
- 33 B. Prescan Your Film
- 35 C. Rotate, Flip, Crop
- 38 Balance, Sharpening)
- 41 Tabs)
- 44 G. Generate Scans
- 45 H. Save Settings and Quit
- 47 Reference – Hardware
- 47 Power Connector and On/Off Switch
- 47 Four Operating Buttons
- 48 Computer Connections (SCSI and USB)
- 48 SCSI Connectors and SCSI ID Controller
- 48 SCSI ID Switch
- 48 USB Port
- 49 Reference – Software
- 49 General Screen Layout
- 49 Thumbnail Images
- 50 Total Number of Prescanned Images
- 50 Thumbnails)
- 50 Selecting/Deselecting Thumbnails
- 51 Eject)
- 51 Zoom In and Zoom Out
- 52 ␣ Clockwise)
- 52 Flip Horizontal and Flip Vertical
- 52 Black Pointer, Gray Pointer, and White Pointer
- 54 CMYK or RGB Values
- 54 Auto Balance
- 55 Default Balance
- 55 Auto-Focus Slide
- 56 Image Window
- 58 Prescan Frame
- 58 Prescan Strip
- 59 Scan to File
- 60 Calibration (Light Source)
- 60 About (Version Numbers and Firmware Upgrade)
- 61 Status Bar
- 62 Settings Tab
- 62 Image Area
- 63 Units and Rulers
- 63 Cropping
- 64 Profiles (Monitor and Output)
- 65 Color Depth
- 66 Sharpening
- 66 Magnify, Resolution, File Size)
- 68 Formulaic Relationships
- 69 Numeric Examples
- 70 Relationships Between Variables
- 71 Manage Scan Profile
- 72 Scan Resolution
- 72 Scan Area
- 73 Color Balance Tab
- 74 Green, and Yellow/Blue
- 74 Reset
- 75 Levels & Curves Tab
- 76 Channel, Histogram, and Curves
- 77 Reset
- 77 Working with Multiple Selected Images
- 77 Selecting Multiple Images
- 78 Scanning Multiple Images
- 79 Software License Agreement
- 83 Warranty
- 86 Troubleshooting
- 86 Hardware
- 87 Software
- 87 Image
- 90 Messages
- 96 Updating the KODAK␣ Driver
- 96 Downloading Software Drivers Electronically
- 97 Installing and Updating Software/Firmware
- 98 Repacking Instructions
- 99 Specifications
- 104 Glossary
- 106 Icon Index
- 106 General Screen Icons
- 109 On the Settings Tab
- 110 On the Color Balance Tab
- 110 On the Levels & Curves Tab
- 111 Technical Assistance
- 112 Index