advertisement
Specifications
3.6 DIMENSIONS AND MOUNTING
3.6.1 DSE907 12V 10A INDUSTRIAL BATTERY CHARGER
Parameter
Cabinet type
Overall size
(see below for diagram)
Comment
Custom cabinet
200mm x 185mm x 170mm (7.9“ x 7.3“ x 6.7“)
Add 20mm (0.79”) to depth when using supplied mounting plate.
Material:
Surface finish:
Protection category:
Sheet steel enclosure of all-round solid construction
Powder-coated black
IP20
NEMA 1
Weight
Mounting type
5.6kg
Wall mounting using supplied wall bracket
Wall bracket add 20mm (0.79”) to the depth of the enclosure
Mounting holes
Diameter 5mm (0.2”)
130mm (5.1) centres
Input voltage (nominal) 110V-277V
Input voltage (absolute range) 90V-305V
Charge failure relay rating
Operating Temperature
Controls
Indication
AC Fuse
DC Fuse
3A DC resistive
30V maximum
-30 ° C to 55 ° C
(-22 ° F to 131 ° F)
AC Power on/off
0A-10A DC ammeter
Power on Red neon indicator
Fuse holder mounted onto front panel.
Accepts 2A anti-surge fuse (20mm x 5mm fuse)
Fuse holder mounted onto front panel.
Accepts 5A anti-surge fuse (20mm x 5mm fuse)
165mm
185mm
130mm 170mm
130mm
Mounting Plate (supplied)
170mm add 20mm when fitting supplied wall bracket
Dimensions in mm
Enclosure
200mm
29
advertisement
Key Features
- 2A output at 30V
- Compatible with all DSE modules
- Charge boost input
- Volt free charge fail output
- Reverse polarity protection
- Suitable for a wide range of battery types
- Longer and more reliable life-span
Related manuals
Frequently Answers and Questions
What type of batteries can the DSE9155 be used with?
How do I connect the DSE9155 to a battery?
What is the charge boost input used for?
advertisement