DSE9470 MKII, DSE9472 MKII, DSE9480 MKII, DSE9481 MKII. DSE DSE9155, DSE9255, DSE9130, DSE9150
Add to My manuals69 Pages
advertisement
Operation
5.5 DSE9470 MKII, DSE9472 MKII, DSE9480 MKII, DSE9481 MKII
NOTE: For obsolete parts 9470-001-00 and 9480-001-00 contact DSE Technical Support for
LED descriptions.
Boost Voltage potentiometer access hole
Charger Status
(OPE)
Fault LEDs
5.5.1 STATUS
Condition
Charger Off
Battery not Detected (Battery Detection Mode)
Battery Connected (Battery Detection Mode)
Not Charging
(Charger is operating correctly but the ouput has been disconnected from the battery)
5.5.2 CHARGE MODE
Mode
Bulk Charge in progress
Absorption Charge in progress
Float Charge in Progress
Storage Charge in Progress
5.5.3 FAULT CONDITIONS
Condition
High Output Voltage (DC)
High / Low Input Voltage (AC) or High Output Current (DC)
High Ambient / Charger Temperature, High Battery
Temperature (if enabled)
Short Circuit/ Reverse Polarity (DC Output Connection)
OPE
Off
Green
Constant
Green
Constant
LED DESIGNATION
FAULT 1
Off
Red
Constant
Red
Constant
Off
Red
Constant
FAULT 2
Off
Red
Flashing
Red
Constant
Red
Constant
LED DESIGNATION
OPE
Yellow Constant
Yellow Flashing
Green Constant
Green Flashing
LED DESIGNATION
FAULT 1 FAULT 2
Red
Constant
Red
Flashing
Off
Off
Off
Off
Red
Constant
Red
Flashing
55
advertisement
Key Features
- 2A output at 30V
- Compatible with all DSE modules
- Charge boost input
- Volt free charge fail output
- Reverse polarity protection
- Suitable for a wide range of battery types
- Longer and more reliable life-span
Related manuals
Frequently Answers and Questions
What type of batteries can the DSE9155 be used with?
How do I connect the DSE9155 to a battery?
What is the charge boost input used for?
advertisement