advertisement
Operation
6.2.2 DIGITAL INPUT
The DSE9400 series is fitted with a configurable digital input. Configuration is made using the DSE
Configuration Suite PC Software.
The Factory Setting for the digital input provides a 12V / 24V selection function.
6.2.3 VOLTAGE ADJUSTMENT POTENTIOMETER
A manually operated potentiometer is provided to make small adjustments to the Boost Voltage without the requirement for the DSE Configuration Suite PC Software.
This is primarily intended to increase charger output to cater for voltage drop in long connection cables.
The potentiometer adjusts the boost voltage byup to ±1.7V. This is subject to an absolute maximum of 29.5V.
The table below shows the effect of the potentiometer on the boost voltage in the various charging modes.
Charge Mode
Bulk
Absorption
Float
Effect on boost voltage
100% of potentiometer setting
50% of potentiometer setting
Potentiometer has no effect on Float Voltage
Potentiometer has no effect on Storage Voltage Storage
6.2.4 PSU MODE
If no battery is connected to the output terminals, the battery charger will operate as a DC power supply only, current limit is factory set to 10A and is adjustable (2A – 10A) using the DSE
Configuration Suite PC Software. See the section entitled Specification elsewhere in this manual for further output specifications.
59
advertisement
Key Features
- 2A output at 30V
- Compatible with all DSE modules
- Charge boost input
- Volt free charge fail output
- Reverse polarity protection
- Suitable for a wide range of battery types
- Longer and more reliable life-span
Related manuals
Frequently Answers and Questions
What type of batteries can the DSE9155 be used with?
How do I connect the DSE9155 to a battery?
What is the charge boost input used for?
advertisement