Lift Cylinder. Midland End Dump Trailer

4.8 LIFT CYLINDER

The trailer is designed with a 4, 5, or 6 stage single acting hydraulic cylinder that raises the front of the box for unloading.

Release the end gate latches before starting to raise the box. Review and follow the unloading instructions before starting.

The tractor must be equipped with a hydraulic pump to supply oil to the cylinder. A spin-on wing nut connector secures the line to the oil supply.

If equipped with a Mailhot or Custom hoist cylinder, a self-bleeding valve at the top of the cylinder purges the system of air during operation. A HYVA cylinder will self-bleed internally.

Wing Nut Coupler

Tandem (Quarter Frame)

Self-bleeding Valve

Fig. 14 LIFT CYLINDER

Triaxle (Pony Pup)

27