Printer Parts. Epson Stylus Pro 7900 Spectro Proofer, Stylus Pro 9900 Spectro Proofer, Stylus Pro 7900, Stylus Pro 7910, Stylus Pro 9900

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide

Printer Parts

Front section

Rear section

1. Adapter holder

Fix the roll paper when setting the roll paper.

2. Roll paper cover

Open the roll paper cover when you set or remove the roll paper.

3. Control panel

The control panel consists of buttons, lights, and a liquid crystal display (LCD).

4. Ink cover (on both sides)

Open the ink cover when installing the ink cartridges.

It slightly opens when you push the printer’s control panel.

button on the

5. Front cover

Open the front cover when you remove jammed paper.

6. Paper basket

Receives the ejected paper.

7. Paper guides

Use the paper guides to lead the paper for feeding forward or backward.

8. Manual box

Place the manual in here. You can set it either on the left or right side of the stand.

1. Maintenance tanks (on both sides and the center)

The tank where the waste ink goes into. There are two maintenance tanks on both sides of Epson Stylus Pro

9900/9910. There is one maintenance tank on the right side of Epson Stylus Pro 7900/7910.

2. USB interface connector

Connects the computer and printer with a USB interface cable.

3. Option interface connector

Connects the printer and options with a cable.

4. Network interface connector

Connects the printer to the network with a network interface cable.

5. AC inlet

Plug the power cord.

Introduction 11