Replacing the Maintenance Tank. Epson Stylus Pro 7900 Spectro Proofer, Stylus Pro 9900 Spectro Proofer, Stylus Pro 7900, Stylus Pro 7910, Stylus Pro 9900

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide

Replacing the

Maintenance Tank

The maintenance tank absorbs ink discharged when cleaning the print head. There are two maintenance tanks placed on the left and right for Epson Stylus Pro

9900/9910 and one placed on the right for Epson Stylus

Pro 7900/7910. You need to replace the maintenance tank when the LCD panel instructs to do so.

Replacing the maintenance tank

Be sure to use a maintenance tank that is supported with this printer.

See “Options and Consumable Products” on page

63

Confirming the free space of the maintenance tank

Using the printer’s control panel

The free space of the maintenance tank is always displayed on the LCD panel.

See “Display” on page 14

You can check the free space in the PRINTER STATUS menu. You need to check it before printing a lot of data. If the maintenance tank has not enough empty space, prepare a new one.

See “Using the Menu mode” on page 16

See “PRINTER STATUS” on page 24

Using the printer driver

You can check the free space of the maintenance tank on your computer by using EPSON Status Monitor.

The instructions are the same as confirming the ink cartridge remaining.

See “Using the printer driver” on page 68

c

Caution:

Do not replace the maintenance tank while printing data.

A

B

C

Turn off the printer.

Take a new maintenance tank out of the package.

Put your hand on the handle of the maintenance tank, then gently pull it straight out.

D

Put the used maintenance tank in the plastic bag provided with the replacement cartridge, and dispose of it properly.

Maintenance 72