Procedure. Precor P80 Console

Below you will find brief information for Fitness Console P80. This service manual provides detailed instructions for troubleshooting and maintenance of the Precor P80 fitness console. It covers installation verification, operation checks, software updates, display and entertainment settings, and various troubleshooting procedures for issues like boot errors, video quality, and touchscreen responsiveness. The manual aims to assist trained service providers in maintaining optimal console performance.

PDF

Document

Section 3 - Operation

Verification

This section provides a quick method of checking the proper operation of the P80. Proper operation of the

P80 should be verified at the end of any maintenance procedure. The following procedure assumes a fully operational console that has been properly installed and connected to video and network sources. In addition, the console must also have been registered and a channel scan completed.

Procedure

Plug the power cord into the wall outlet (or turn on the treadmill with its breaker switch). Verify that the P80 "Boots Up" to the "Welcome" screen (the boot sequence will take some time).

Figure 15: Welcome Screen

Press the "Quick Start" button on the touch screen and verify that the unit starts the manual workout program.

Verify that the machine control lever(s) operate(s) the appropriate machine functions of the equipment base.

•

Press RESISTANCE



(SPEED



on a treadmill) lever in the up direction and verify that resistance level or speed has been increased.

Page 21 © Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law

•

Press RESISTANCE



(SPEED



on a treadmill) lever in the down direction and verify that resistance level or speed has been decreased.

• If the unit has a variable cross ramp or lift, press INCLINE



lever in the up direction and verify that the incline travels in the up direction.

•

If the unit has a variable cross ramp or lift, press INCLINE



lever in the down direction and verify that the incline travels in the down direction.

• If the P80 is connected to a treadmill, pull the E-stop lanyard and verify that the screen displays

"Reset the Treadmill" along with a picture of the E-stop switch in the "UP" position.

Set the touch screen to view the "Entertainment Panel" and verify that TV channels are displayed.

•

Verify that the current channel is displayed in the preview window.

•

Press one of the other channels in the list on the touch screen and verify that the channel changes in approximately 3 seconds.

• Press the channel up switch and verify that the channel changes in approximately 3 seconds.

•

Press the channel down switch and verify that the channel changes in approximately 3 seconds.

•

Plug in a set of headphones and verify that sound is present at both ears.

•

Press the volume up switch and verify that the volume increases.

•

Press the volume down switch and verify that the volume decreases.

If "Preva® Networked Fitness" option is activated, verify that the Preva® net panel icon is displayed.

•

Press the Preva® net panel icon and verify the Preva® net panel appears.

•

Press the "ALL" button and verify that a list of RSS feeds appears.

•

Press the "Go" button and verify that the RSS article loads and is displayed on the screen. Viewing an RSS article also verifies that the P80 is capable of web access.

Key features

Touchscreen interface
Network connectivity
Integrated TV functionality
Preva network integration
Comprehensive service diagnostics

Frequently asked questions

Hold the Pause key and press the Volume Down, Channel Up, Volume Up, and Channel Down keys sequentially in an 'X' pattern. Then enter the technician access code 5,1,7,6,5,7,6,1.

The P80 requires a separate 12Vdc power supply. For treadmills, it's mounted inside the frame; for other units, it's externally mounted, usually in a cable management connector.

Acquire the latest software from the Precor FTP site, then install it using the procedure outlined in Section 6 of the service manual.

Refer to the troubleshooting section of the service manual for possible causes and remedies. This typically involves checking the emergency stop switch and related cabling.