- Sports & recreation
- Fitness, gymnastics & weight training
- Treadmills
- Precor
- P80 Console
- Service manual
Boot Error resulting in Yellow Triangle Being Displayed. Precor P80 Console
Add to My manuals126 Pages
advertisement
![Boot Error resulting in Yellow Triangle Being Displayed. Precor P80 Console | Manualzz Boot Error resulting in Yellow Triangle Being Displayed. Precor P80 Console | Manualzz](http://s1.manualzz.com/store/data/006365337_1-a90e7abefcc113820c173be00ccfbfca-360x466.png)
Boot Error resulting in Yellow Triangle Being Displayed
Description
When the P80 is powered on there is a small delay of 2.5 minutes caused by the various boards initializing in a specific sequence. If there is a problem with the initialization of any of these, the P80 will attempt to load that software from the backup software location. While the backup software is loading a progress bar will be displayed, but if the attempt fails a red "X" will be displayed over the progress bar, and a 2nd attempt will be made automatically. If it fails the second attempt, the yellow triangle screen will be displayed.
Figure 61: Yellow Triangle Screen
Possible Causes
1
Second re-boot attempt failed resulting in a recoverable boot error.
Possible Remedies
1
Recovery from this error may be possible. Please call Precor Customer Support for assistance.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 85
advertisement
Related manuals
advertisement
Table of contents
- 7 About this Document
- 7 Safety Guidelines
- 9 Equipment Base Cabling
- 9 P80 Power Requirements
- 9 Treadmill Specific Concerns
- 11 Cable Routing Through the P80 Armor
- 11 Cable Routing Order
- 12 1-Stop Switch Cable Routing
- 13 2-RF Coax Cable Routing
- 15 3-Ethernet Cable Routing
- 16 4-Data Cable Routing
- 17 5-Auto-Stop Cable Routing
- 18 6-Power Cable Routing
- 19 7-Heart Rate Cable Routing
- 20 Mounting the P80 Console
- 22 Initial Configuration Steps
- 22 Steps to Perform on Each And Every P80
- 22 Steps that can be Cloned (copied)
- 23 Procedure
- 25 Operation Verification Checklist
- 27 Settings Menu
- 29 P80 Settings Menu Table
- 31 About Menu
- 34 Equipment Usage Menu
- 35 P80 Equipment Usage Menu Table
- 36 System Settings Menu
- 37 P80 System Settings Menu Table
- 39 System Tests
- 40 P80 System Test Menu Table
- 44 P80 Workout Limits
- 45 P80 Workout Limits Menu Table
- 47 Verifying Hardware Compatibility
- 47 Method 1 – The Event Log:
- 47 Method 2 – Part Number Dash:
- 48 Acquiring P80 Software from the Precor FTP Site
- 48 Procedure:
- 51 Installing P80 software into the P80 console
- 51 Procedure
- 57 P80 Display
- 59 P80 Display Settings Menu Table
- 61 P80 TV Settings
- 62 P80 TV Settings Menu Table
- 64 Channel Guide
- 64 To scan for available channels:
- 64 To name a channel:
- 64 Direct entry from the P80 screen
- 65 Computer method for P80 consoles running software prior to version 3.2
- 66 Computer method for P80 consoles running software version 3.2 or later
- 68 To delete a channel from the Channel Guide:
- 68 How to update the channel plan:
- 71 P80 Manage Settings (Cloning)
- 71 P80 Manage Settings Table
- 73 P80 Cloning Procedure
- 79 P80 Connectivity
- 79 To view connectivity information:
- 80 P80 Connectivity Settings Menu Table
- 81 P80 Connectivity Set Up and Registration Procedure
- 82 Manual Configuration Steps Only:
- 85 Verifying the Hardware Version
- 86 Method 1 – The Event Log:
- 86 Method 2 – Part Number Dash
- 87 Boot Error resulting in Yellow Triangle Being Displayed
- 87 Description
- 87 Possible Causes
- 87 Possible Remedies
- 88 Boot Error resulting in Red Triangle Being Displayed
- 88 Description
- 88 Possible Causes
- 88 Possible Remedies
- 89 Preva Net Panel Icon Not Displayed
- 89 Description
- 89 Possible Causes
- 89 Possible Remedies
- 90 Preva Net Panel Displayed but Web Pages and/or RSS Feeds Do Not Load
- 90 Description
- 90 Possible Causes
- 90 Possible Remedies
- 91 Sign-in Button Does Not Appear On the Welcome Screen
- 91 Description
- 91 Possible Causes
- 91 Possible Remedies
- 92 Black Screen - Full Console
- 92 Description
- 92 Possible Causes
- 92 Possible Remedies
- 92 Boot Screen Procedure
- 93 Poor Quality Video - Single Unit Only
- 93 Description
- 93 Possible Causes
- 93 Possible Remedies
- 94 Poor Quality Video – All Units
- 94 Possible Causes
- 94 Possible Remedies
- 95 Poor Quality Video – One Channel(s) or Limited Channels
- 95 Description
- 95 Possible Causes
- 95 Possible Remedies
- 96 Green Screen
- 96 Description
- 96 Possible Causes
- 96 Possible Remedies
- 97 Stuttering Channels
- 97 Description
- 97 Possible Causes
- 97 Possible Remedies
- 98 Touch Screen Slow Response
- 98 Description
- 98 Possible Causes
- 98 Possible Remedies
- 99 Touch Screen Responds Incorrectly to Touch or is Unresponsive
- 99 Description
- 99 Possible Causes
- 99 Possible Remedies
- 99 Screen Calibration Procedure
- 100 Poor Quality Video - One Channel or Limited Channels
- 100 Possible Causes
- 100 Possible Remedies
- 101 Poor Audio Quality – All Channels, Multiple Units
- 101 Description
- 101 Possible Causes
- 101 Possible Remedies
- 102 Machine Controls Unresponsive
- 102 Description
- 102 Possible Causes
- 102 Possible Remedies
- 103 Message Out of Service Displayed
- 103 Description
- 103 Possible Causes
- 103 Possible Remedies
- 104 Message Please Reset the Treadmill Displayed
- 104 Description
- 104 Possible Causes
- 104 Possible Remedies
- 105 Unit reboots of its own volition
- 105 Description
- 105 Possible Causes
- 105 Possible Remedies
- 106 Treadmill - Resets to Welcome Screen at Beginning of the “3…2…1…” Countdown
- 106 Description
- 106 Possible Remedies
- 107 USB Flash Drive Not Recognized
- 107 Description
- 107 Possible Causes
- 107 Possible Remedies
- 109 Upper Component Access:
- 110 The Main Vented Access Cover & Components
- 111 Replacing the P80 Console
- 111 Console Mounting - Removal
- 112 Disconnecting Cables
- 114 Console Installation
- 115 Cable Connections
- 118 Securing the P80 Console
- 118 Replacing the P80 Heart Rate PCA Board
- 118 Procedure