advertisement
REC
PLAY
PAUSE q
5 / 8
6
–
™
+
£
PAUSE
Recording
Perform steps 1 – 3 on page 11 ("Simple Recording") before continuing.
19
1
START RECORDING
Press and hold REC and DURING B.E.S.T.
press PLAY on the remote control, or press REC on the VCR's front panel.
● The VCR takes about 7 seconds to assess the quality of the tape in use, then recording begins with the picture level optimized.
START END
+
B.E.S.T.PICTURE SYSTEM
+
NOTES:
● B.E.S.T. occurs immediately prior to both the
B.E.S.T. COMPLETE first SP and the first EP recording after inserting the cassette. It does not
START take place during
+ recording.
● In the case of timer
B.E.S.T.PICTURE SYSTEM recording, B.E.S.T. takes place for both SP and EP before the first timer recording after inserting the
END
+ cassette (regardless of the tape speed selected for that recording).
● Once the cassette is ejected, the B.E.S.T. data is canceled. The next time the cassette is used for recording, B.E.S.T. is re-performed.
● While B.E.S.T. is operative, the PAUSE button will not function.
● SUPERIMPOSE must be set to "ON" or the B.E.S.T.
Picture System screen will not appear (
Z
pg. 14).
ATTENTION: n As B.E.S.T. takes place before recording actually starts, there is a delay of about 7 seconds after REC and PLAY on the remote, or REC on the VCR's front panel, are pressed.
To make sure you record the desired scene or program completely, first perform the following steps:
1) Press and hold PAUSE, and press REC to engage the
RECORD PAUSE mode.
●
The VCR then automatically checks the condition of the tape and, after about 7 seconds, re-enters RECORD
PAUSE.
2) Press PLAY to start recording.
n
If you want to bypass B.E.S.T. and start recording right away, set "RECORDING" to "OFF" in step 4 of the
Preparation procedure (
Z
pg. 18).
advertisement