advertisement
TV BRAND NAME
JVC
PHILIPS
PHILICO/HITACHI
SHARP
TOSHIBA
MITSUBISHI
PHILICO/DAEWOO
PACKARD BELL
KIOTE/DAEWOO
DAEWOO
SAMSUNG
GOLDSTAR
RCA
PANASONIC
SONY
ZONDA
AKAWA
ELECTRA
PHILICO
SPECIAL FEATURES
TV/VIDEO
NUMBER
VOL. +/-
CH
09
09
10
11
05
06
07
08
09
BRAND CODE
01
03
12
14
15, 16
18
19, 20, 21
21, 22
23
25
POWER
ENTER
TV/VCR
31
TV Multi-Brand Remote
Control
The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below. Some TV brands have more than one code. If the
TV will not function with one code, try entering another.
TURN ON THE TV
Turn the power on using the TV's remote control.
1
2
SET REMOTE CONTROL
MODE
Set the TV/VCR switch on the VCR's remote control to
TV.
3
4
SET TV BRAND CODE
Refer to the chart below. While holding down POWER, enter your TV’s brand code using the NUMBER keys, then press STOP.
●
Once you have set the remote control to operate the
TV, you don’t have to repeat this step until you replace your remote control’s batteries.
OPERATE TV
First, press POWER on the remote to see if the TV’s power goes off as it should. If it does, try other operations.
●
The POWER, TV/VIDEO, CH
5∞
, VOL +/– and
NUMBER keys on the remote can all be used to operate the TV. *For some brands of TV, you must press ENTER after having pressed the NUMBER keys.
●
To return the remote to VCR control, set the TV/VCR switch to VCR.
NOTE:
Depending on the kind of TV, there may be cases where some or all functions cannot be operated using the remote control.
advertisement