4.Miner Connection and Pre-Power Check. MicroBT Whats Miner M10
Add to My manuals36 Pages
MicroBT Whats Miner M10, a powerful Bitcoin mining machine, boasts an impressive hashrate of 33TH/s ±5%. Equipped with 315pcs 16nm ASIC chips, it efficiently converts electricity into computing power. With a power consumption of 2145W±10%, it maintains a remarkable power rate of 65W/T ±10%. The Whats Miner M10 includes a dedicated control panel and operates optimally in environments with temperatures ranging from -5℃ to 40℃. Its compact size of 390mm130mm220mm makes it suitable for various mining setups.
advertisement
The miner defaults to DHCP to obtain dynamic ip. Therefore, the mine network must be configured with a DHCP server, or the router can enable dhcp to dynamically allocate the IP address service.
The running time of the miner, the correctness of the calculation statistics, etc. depend on the network NTP time. The mining machine itself is configured with multiple NTP server addresses of the public network by default. In order to speed up the acquisition of network time and improve the time precision, it is recommended to mine the network. Configure a local NTP server.
4.Miner Connection and Pre-Power Check
(1) Before the wiring and power-on of the machine, according to the warning signs on the side of the machine, shake the machine to check whether there is a radiator or other components falling off, to ensure that there is no radiator or other period to fall off before wiring and power-on.
12
advertisement
Related manuals
advertisement
Table of contents
- 3 1. M10 Product Introduction
- 3 2.Whats Miner Connection and Racking Safety Notes
- 3 2.1.Miner Connection Notes
- 4 2.1.1.Power Supply Control Wire Connection Notes
- 4 2.1.2.Adapter Board Control Wire Connection Notes
- 6 2.1.3.Fan Connection Notes
- 7 2.1.4.Hash Board and Adapter Board Connection Note
- 9 2.1.5.Power Supply Copper Busbar Connection Notes
- 10 2.1.6.Product Connection Check
- 10 2.2.Miner Handling and Racking Notes
- 11 3. Miner Configuration Environment Preparation
- 11 3.1.Miner Configuration Equipment List
- 11 3.2.Miner Network Environment
- 12 4.Miner Connection and Pre-Power Check
- 12 (1)Before the wiring and power-on of the machine, acc
- 13 (2)The machine is connected to the power wiring, and
- 13 5.Miner Data Configuration(Configuration on the we
- 13 5.1.Query the dynamic IP address obtained by the m
- 13 5.1.1.Run WhatsMinerTools software
- 14 5.1.2.Check the IP address Reported by the Miner
- 16 5.2.Configuration Pool&Worker Data and NTP Server
- 16 5.2.1.Configuration Pool&Worker
- 18 5.2.2.Modify the NTP Synchronization Server Addres
- 19 5.3.Configuration the Static IP Address (optional)
- 22 6.Miner Operation Status Check
- 24 7.Miner Batch Data Configuration, Miner Status Che
- 24 8.Miner Disassembly and Installation
- 24 8.1. Control Panel Disassembly and Installation
- 24 8.1.1.Control Panel Disassembly
- 26 8.1.2.Control Panel Installation
- 28 8.2.Power Supply Disassembly and Installation
- 28 8.2.1.Power Supply Disassembly
- 29 8.2.2.Power Supply Installation
- 31 8.3.Hash Board Disassembly and Installation
- 31 8.3.1.Hash Board Disassembly
- 33 8.3.2.Hash Board Installation