Drive interlock (option). Wacker Neuson EZ36

Operation 5

5.13 Options

Drive interlock (option)

A B

A = starting key (blue)

For starting the vehicle. Scope of delivery includes 2 keys.

B = master key (red)

Information

Store the master key in a safe place. It can only be used for coding new starting keys.

A new immobilizer must be installed if the master key is lost.

Fig. 246

P

Fig. 247

0

1

3

2

Coding new starting keys

1. Insert master key B in the starter and turn it to position 1 for a maximum five seconds.

2. Remove master key B .

3. Keep master key B at least 50 cm (20 in) away from the starter.

4. Within 15 seconds, turn starting keys requiring coding to position 1 for at least one second.

5. Repeat step 4 if more starting keys require coding.

➥ With this the coding of the starting keys is completed.

Coding can be performed for a maximum of 10 starting keys.

Information

The procedure is automatically canceled if no key requiring coding is detected by the system within 15 seconds.

Deleting coded keys

Deleting all coded keys is necessary whenever a coded key is lost.

The master key code is not deleted during deletion.

1. Insert master key B in the starter and turn it to position 1 for at least 20 seconds.

2. Code the starting keys.

BA E16 en* 1.0 * E16_10_510.fm

5-71