7 Maintenance
Tool bag
In the toolbox to the left of the operator seat is the vehicle tool kit.
Fig. 275
Cabin air filter
A
A
Fig. 276
B
1. Loosen screws A and remove cover.
2. Clean coarse filter B with compressed air daily.
3. Reinstall the cover and fasten it with screws A .
Fig. 277
7-22
BA E16 en* 1.0 * E16_10_700.fm
7.5
Cleaning and maintenance
WARNING
Injury hazard due to rotating parts!
Rotating parts can cause serious injury or death.
► Open the engine cover only at engine standstill.
WARNING
Burn hazard due to hot surfaces!
Hot surfaces can cause serious burns or death.
► Stop the engine and let it cool down.
► Wear protective equipment.
CAUTION
Health hazard due to cleaning agents!
Cleaning agents can be harmful to health.
► Use only suitable cleaning agents.
► Ensure sufficient ventilation.
Maintenance 7
BA E16 en* 1.0 * E16_10_700.fm
7-23
7 Maintenance
NOTICE
Damage to rubber and electrical parts when cleaning with solvents.
Do not use solvents, benzine, or other aggressive chemicals.
NOTICE
Damage to electronics due to water jet.
► Do not point the water jet directly at electric components, and protect the electric components against humidity.
► If water contacts electrical components, dry them with compressed air and apply contact spray to them.
Environment
In order to avoid damage to the environment, clean the vehicle only in wash bays and places authorized by the authorities.
Cleaning the vehicle is divided into three separate areas:
• Inside the cabin
• Exterior of the vehicle
• Engine compartment
7-24
BA E16 en* 1.0 * E16_10_700.fm
