advertisement
![SIP and SPA Compatibility. Cisco 10000 SIP-600 | Manualzz SIP and SPA Compatibility. Cisco 10000 SIP-600 | Manualzz](http://s2.manualzz.com/store/data/060163119_1-764345e04cd2378d7af7281d494c15a5-360x466.png)
Chapter 1 SIP and SPA Product Overview
SIP and SPA Compatibility
Shared Port Adapters
General characteristics of a SPA include:
•
•
A SPA is a modular type of port adapter that inserts into a subslot of a compatible SIP carrier card to provide network connectivity and increased interface port density. A SIP can hold one or more
SPAs, depending on the SIP type and the SPA size.
SPAs are available in the following sizes:
– Half-height—Inserts into one SIP subslot.
– Full-height—Inserts into two horizontally aligned SIP subslots. The Cisco 10000 SIP-600 supports two full-height SPAs, specified as SPA 0 and SPA 1.
– Full-height, double-wide—Occupies four standard, half-height SIP subslots.
Figure 1-1 shows the slot orientation for the SPAs.
Figure 1-1
Front of SIP
Vertical Chassis Slot Orientation for SPA Subslots
Vertical slot orientation
•
•
•
Each SPA provides a certain number of connectors, or ports, that are the interfaces to one or more networks. These interfaces can be individually configured using the Cisco IOS command-line interface (CLI).
To maintain cooling integrity, either a blank filler plate (SPA-BLANK=) or a functional SPA must reside in each subslot of a SIP during normal operation. Blank filler plates are available in half-height form only.
SPAs support online insertion and removal (OIR). They can be inserted or removed independently from the SIP. The SIP also supports OIR with SPAs inserted in their subslots.
SIP and SPA Compatibility
shows the SPAs that are supported on the Cisco 10000 series router and the SIPs that support them.
1-2
Cisco 10000 Series Router SIP and SPA Hardware Installation Guide
OL-13838-02
advertisement
Related manuals
advertisement
Table of contents
- 7 Objectives
- 7 Audience
- 8 Document Revision History
- 8 Organization
- 9 Related Documentation
- 9 Obtaining Documentation, Obtaining Support, and Security Guidelines
- 11 Introduction to SIPs and SPAs
- 11 SPA Interface Processors
- 12 Shared Port Adapters
- 12 SIP and SPA Compatibility
- 13 Modular Optics Compatibility
- 14 Power Management
- 15 SIP Summary
- 15 Checking Hardware and Software Compatibility
- 16 Identifying Slots and Subslots for SIPs and SPAs
- 16 Specifying the Slot Location for a SIP
- 19 Specifying the Location for a SPA
- 20 Cisco 10000 SIP-600 Overview
- 20 Cisco 10000 SIP-600 Processor
- 20 Cisco 10000 SIP-600 LED
- 22 Cisco 10000 SIP-600 Physical Specifications
- 23 Bandwidth Oversubscription
- 25 SIP Ingress Oversubscription
- 25 PRE4 Egress Oversubscription
- 25 SIP Performance with a PRE3
- 26 1-Port 10-Gigabit Ethernet SPA Overview
- 27 1-Port 10-Gigabit Ethernet SPA LEDs
- 27 1-Port 10-Gigabit Ethernet SPA XFP Optical Transceiver Modules, Connectors, and Cables
- 27 XFP Connections
- 29 XFP Port Cabling Specifications
- 29 2-Port Gigabit Ethernet SPA Overview
- 29 2-Port Gigabit Ethernet SPA LEDs
- 30 2-Port Gigabit Ethernet SPA Cables and Connectors
- 30 SFP Module Connections
- 31 SFP-GE-S Modules
- 31 SFP-GE-L Modules
- 32 SFP-GE-Z Modules
- 32 SFP-GE-T Modules
- 32 SFP Module Cabling and Connection Equipment
- 33 5-Port Gigabit Ethernet SPA Overview
- 33 5-Port Gigabit Ethernet SPA LEDs
- 34 5-Port Gigabit Ethernet SPA Cables and Connectors
- 34 SFP Module Connections
- 35 SFP-GE-S Modules
- 36 SFP-GE-L Modules
- 36 SFP-GE-Z Modules
- 36 SFP-GE-T Modules
- 36 SFP Module Cabling and Connection Equipment
- 37 8-Port Gigabit Ethernet SPA Overview
- 37 8-Port Gigabit Ethernet SPA LEDs
- 38 8-Port Gigabit Ethernet SPA Cables and Connectors
- 38 SFP Module Connections
- 39 SFP-GE-S Modules
- 39 SFP-GE-L Modules
- 40 SFP-GE-Z Modules
- 40 SFP Module Cabling and Connection Equipment
- 41 2-Port Channelized OC-12/DS0 SPA
- 41 2-Port Channelized OC-12/DS0 SPA LEDs
- 42 2-Port Channelized OC-12/DS0 SPA Interface Specifications
- 42 2-Port Channelized OC-12/DS0 SPA SFP Optical Transceiver Modules and Cables
- 45 Required Tools and Equipment
- 45 Safety Guidelines
- 45 Safety Warnings
- 46 Warning Definition
- 50 Electrical Equipment Guidelines
- 50 Telephone Wiring Guidelines
- 51 Preventing Electrostatic Discharge Damage
- 51 Laser/LED Safety
- 55 Handling SIPs
- 56 Online Insertion and Removal of a SIP
- 57 Deactivating a SIP
- 57 Reactivating a SIP
- 57 Verifying the Status of a SIP
- 59 SIP Installation and Removal
- 59 Installing a SIP
- 62 Removing a SIP
- 67 Handling SPAs
- 68 Online Insertion and Removal of a SPA
- 68 Deactivating a SPA
- 69 Reactivating a SPA
- 69 Verifying the Status of a SPA
- 70 Installing a SPA in a SIP
- 70 Removing a SPA from a SIP
- 70 Optical Device Maintenance
- 71 Cleaning Optical Devices
- 71 Checking the Installation
- 71 Verifying the Installation
- 72 Using show Commands to Verify SPA Status
- 72 SPA Blank Filler Plates
- 73 Troubleshooting
- 74 Using debug Commands
- 75 Packing a SPA for Shipment
- 75 Packing a SIP for Shipment