![](http://s2.manualzz.com/store/data/060254202_1-ebb9c86a140871271db7040f377b6357-128x128.png)
advertisement
![Product Overview. Isgus Perfect 2020 | Manualzz Product Overview. Isgus Perfect 2020 | Manualzz](http://s2.manualzz.com/store/data/060254202_1-ebb9c86a140871271db7040f377b6357-360x466.png)
Product Overview
The PERFECT 2020 is an electronic time recorder used for the printing of employee time and attendance records. The time recorder can be programmed by the user to suit many different work schedules.
Your ISGUS time recorder is equipped with the following features to simplify time recording in your company:
• Real time clock, quartz controlled with battery back-up
• Synchronized analogue display clock with power reserve
• Automatic changing of daylight-saving-time (when programmed)
• Automatic adjustment for leap year
• Large selection of pre-defined card formats
• Large selection of defined print formats
• Two color print programmable
• circuit
• Automatic column selection
• Check of individuals
The PERFECT 2020 prints the time and day automatically when the employee inserts a time card into the card funnel. The positioning of the printed time on the time card is done automatically by the time recorder.
A number of standard card formats are available and can be selected from the programming routine. The card format is generally determined by the pay period frequency of your company.
In order to guarantee the reliability of the time recorder, each unit has been tested thoroughly before leaving the factory. If there are any problems that cannot be resolved using this manual, please contact your local dealer or e-mail us at: [email protected] or [email protected]
This manual provides step-by-step instructions for the handling of the time recorder.
Before using the time recorder, please read the manual carefully and pay close attention to all safety instructions.
2 Product Overview
advertisement
Related manuals
advertisement
Table of contents
- 1 PERFECT 2020
- 3 Impressum
- 5 Safety instructions
- 7 Table of Contents
- 8 Product Overview
- 9 Time Recorder Specifications
- 10 Contents
- 11 Selecting a Location
- 11 General Conditions
- 11 Specific Conditions for the Time Recorder
- 12 Time Recorder Installation
- 12 Installation for Table Operation
- 13 Wall Mounting
- 14 Open the Recorder
- 15 Close the Recorder
- 15 Remove the Metal Back Plate
- 16 Wall Mounting
- 16 Connect the Power Supply
- 18 Connect Optional Features
- 20 Getting Started
- 20 Switch on the Unit
- 21 Programming Panel
- 24 Setting the Time and Date
- 26 Showing or Setting the Time of the Internal Quartz Clock
- 27 Synchronizing the Analogue Clock
- 27 Setting the Date
- 28 Programming
- 28 Calling up the Programming Routine
- 29 Daylight Saving Time Change-over
- 31 Column Change Timing
- 33 Card Lift / Line Change timing
- 34 Ribbon Color Change
- 36 Signal Operation
- 38 Signal out-programming
- 39 Check of individuals (Option)
- 40 Punching at the Recorder
- 41 Punching with Standard Time Cards
- 41 Standby Operation (Option)
- 42 Change of Fuse for Signal Output
- 43 Error messages
- 44 Adjustment Routine
- 44 Card lift / Line change
- 44 Column change
- 45 Changing the Ribbon
- 46 Cleaning the Time Recorder
- 47 Technical Specifications
- 48 Local Sales and Service Dealer