![](http://s2.manualzz.com/store/data/060254202_1-ebb9c86a140871271db7040f377b6357-128x128.png)
advertisement
![Technical Specifications. Isgus Perfect 2020 | Manualzz Technical Specifications. Isgus Perfect 2020 | Manualzz](http://s2.manualzz.com/store/data/060254202_1-ebb9c86a140871271db7040f377b6357-360x466.png)
Technical Specifications
Dimensions
Weight
Supply voltage
Current consumption
Power consumption
Protection type
Protection class
Ambient temperature
Relative humidity
Connection
Determination of time
Signal circuit
Printer
Battery pack
Height: 280 mm (11.02 inches)
Width: 220 mm (8.67 inches)
Depth: 195 mm (7.68 inches)
3 kg
20 V AC +/- 10 % 50 / 60 Hz max. 800 mA max. 45 VA
IP 20
I
5
°
C to 40
°
C
(no direct sunlight) max. 80 %, non condensing
- Standby operation (Option)
- Slave clock function (Option)
12-60V, 2-10mA,
unipolar/bipolar impulses
- Master clock (Option),
Output 12V, 50mA max.
- Signal circuit, see item "Signal operation"
Quartz, Pola
Low power signal output: 15 V DC, 50 mA
Fuse: 50 mA T
9 dot matrix printer
Nominal voltage
Nominal capacity
12 V
600 mAh
Discharge temperature: -20 to + 60° C
Storage temperature: -30 to + 50° C
Plug-in power supply unit
Supply voltage
Rated output
120 V / 20 V AC +/-10 % 50 - 60 Hz permanent 16 VA / max. 45 VA
Technical Specifications 41
advertisement
Related manuals
advertisement
Table of contents
- 1 PERFECT 2020
- 3 Impressum
- 5 Safety instructions
- 7 Table of Contents
- 8 Product Overview
- 9 Time Recorder Specifications
- 10 Contents
- 11 Selecting a Location
- 11 General Conditions
- 11 Specific Conditions for the Time Recorder
- 12 Time Recorder Installation
- 12 Installation for Table Operation
- 13 Wall Mounting
- 14 Open the Recorder
- 15 Close the Recorder
- 15 Remove the Metal Back Plate
- 16 Wall Mounting
- 16 Connect the Power Supply
- 18 Connect Optional Features
- 20 Getting Started
- 20 Switch on the Unit
- 21 Programming Panel
- 24 Setting the Time and Date
- 26 Showing or Setting the Time of the Internal Quartz Clock
- 27 Synchronizing the Analogue Clock
- 27 Setting the Date
- 28 Programming
- 28 Calling up the Programming Routine
- 29 Daylight Saving Time Change-over
- 31 Column Change Timing
- 33 Card Lift / Line Change timing
- 34 Ribbon Color Change
- 36 Signal Operation
- 38 Signal out-programming
- 39 Check of individuals (Option)
- 40 Punching at the Recorder
- 41 Punching with Standard Time Cards
- 41 Standby Operation (Option)
- 42 Change of Fuse for Signal Output
- 43 Error messages
- 44 Adjustment Routine
- 44 Card lift / Line change
- 44 Column change
- 45 Changing the Ribbon
- 46 Cleaning the Time Recorder
- 47 Technical Specifications
- 48 Local Sales and Service Dealer