Switching LOCAL/REMOTE Mode. YASKAWA VS mini CIMRJ7 A40P2 Series, VS MINI J7, VS mini CIMRJ7 A20P4 Series, VS mini CIMRJ7 AB0P1 Series, VS mini CIMRJ7 A20P7 Series, VS mini CIMRJ7 A20P2 Series, VS mini CIMRJ7 A21P5 Series, VS mini CIMRJ7 A42P2 Series, VS mini CIMRJ7 AB0P2 Series, VS mini CIMRJ7 AB1P5 Series

„ Switching LOCAL/REMOTE Mode

The following functions can be selected by switching LOCAL or

REMOTE mode. To select the RUN/STOP command or frequency reference, change the mode in advance depending on the following applications.

• LOCAL mode: Enables the Digital Operator for RUN/STOP commands and FWD/REV RUN commands. The frequency reference can be set using the potentiometer or .

• REMOTE mode: Enables RUN Command Selection (n02). The frequency reference can be set by n03 (frequency reference selection) setting.

† How to Select LOCAL/REMOTE Mode

When LOCAL/REMOTE switching function is not set for multi-function input selection

(When 17 is not set for any of constants n36 to n39)

When LOCAL/REMOTE switching function is set for multi-function input selection

(When 17 is set for any of constants n36 to n39)

Select Lo for operator

LO/RE selection.

Select rE for operator

LO/RE selection.

Turn ON multifunction input terminal.

Turn OFF multifunction input terminal.

LOCAL mode REMOTE mode

48