Removing the Headrail (If Necessary). HunterDouglas Paramount Headrail Systems

CARE

Removing the Headrail (If Necessary)

■ To remove the headrail, locate the rear tab on the mounting clip.

■

Push up on the rear tab to release the headrail.

Paramount ® Headrail

Rear Tab

PermaTrak ® and PermAlign ® Headrail

Tilt to

Remove

Rear Tab

Tilt to

Remove

Push Up Push Up

Removing the Vanes (If Necessary)

■

Push up on the vane.

■ Gently open the vane hook by inserting a ‘credit card’ sized piece of rigid plastic between the vane and the long prong of the vane hook.

■ Carefully remove the vane.

Cleaning Procedures

Dusting

■

Regular light dusting with a feather duster is all the cleaning that is needed in most circumstances.

Vacuuming

■ Use a hand-held vacuum with low suction for more thorough dust removal.

Spot-Cleaning

■ Prepare a solution of warm water and a mild detergent.

■ Dampen a clean cloth in the solution and wring it out.

■ Dab the spot with the dampened cloth until it is gone.

CAUTION: Vertical fabrics should not be spot-cleaned or immersed in water.

Compressed Air

■ You can use compressed air or a hair dryer (cool setting) to blow the dust off your valance.

16